Citizen Systems PPU-231II manual ESC & s n m a p s⋅ a m-n+1, Range

Page 24

ESC & s n m [a [p] s⋅ a] m–n+1

[Function]	Defining the download characters
[Code]	<1B>H<26>H<s>H<n><m>[<a><p1><p2> ⋅ ⋅ <ps ⋅ a>]m-n+1
[Range]	s = 3
	32	n	m	126
	0	a	12 (Font A)
	0	a	9 (Font B)
	0	p1 ⋅ ⋅ ps ⋅		a 255
[Outline]	Defines the font of download characters of alphanumeric
	characters.

•“s” indicates the number of bytes in vertical direction.

•“n” indicates the start character code and “m” the end character code. To define only one character, set n=m.

•Character codes definable includes 95 ASCII codes in total in the range of <20>H to <7E>H.

•“a” indicates the number of dots to be defined in horizontal direction.

•“p” is the data to be defined, which indicate a pattern equal to “a” dots in horizontal direction from the left end. The rest of the pattern on the right side is filled with space.

The number of data to be defined is s ⋅ a.

•Download characters thus defined remain valid until

redefinition, ESC @, GS *, FS q execution, ESC ? deletion or power OFF is performed.

[Caution]	• Download characters and download bit images cannot be
	defined simultaneously.
	• Running this command clears the definition of the download
	bit image.
[Default]	Same as the internal character set.
[See Also]	ESC %, ESC ?

— 22 —

Image 24

Contents Command Reference Revision Command Function Mode Code Print Control FunctionsFunction Mode Code ESC \Command relative to NV memory Default RangeOutline ReferenceCommand Details See AlsoPrint Results See Also Sample Program Standard Mode ModePrint Result Can DLE EOT n Range OutlineExample Page See Also DLE ENQ n ESC FF Default See Also ESC SP nLprint Aaaaa + CHR$&HA ESC ! n Lprint CHR$&HA END ESC $ n1 n2 100 ESC % n Gosub SetchrESC & s n m a p s⋅ a m-n+1 Font a ESC * m n1 n2 d k IMG1 ESC n ESC ESC 3 n ESC = n ESC ? n ESC @ Function Code Outline Sample Program Print ResultsESC D n k NUL ESC E n ESC G n ESC J n ESC L ESC M n Definition valueDetails ESC R n ESC S ESC T n Default Sample Program ESC V nESC W xL xH yL yH dxL dxH dyL dyH CAN, ESC L, ESC T, GS P ESC \ nL nH ESC a n ESC c 3 n ESC c 4 n ESC c 5 n ESC d n ESC n n ’ ∝ ← n = Default Sample Program Print Results GS ! n Horizontal MagnificationVertical Magnification Default See Also GS $ nL nH See Also ESC $, ESC T, ESC W, ESC \, GS P, GS \GS * n1 n2 d n1⋅ n2⋅ Next I Next J Return GS a pL pH n m DefinitionGS / m Specifying starting/ending macro definition GS a m n GS B n GS H n Print Results GS I n GS L nL nH GS P, GS W GS P x y GS R 0 n GS R 1 n GS S 1DH56Hm 1DH56Hmn GS W nL nH GS L, GS P GS \ nL nH GS n1 n2 n3 GS a n Paper feed state triggered by Feed switch DLE EOT, GS r GS f n Selecting bar code height D1 ..... dk NUL D1 ...... dnFor Standard Mode ForFor page Mode Default Initial value is not definedDescription of Bar Codes For print examples, refer to UPC-AAscii This bar code consists of 103 bar code characters Special characters FNC4Description of Bar Codes GS r n See Also DLE EOT, GS aGS v 0 m xL xH yL yH d1...dk When xL+xH ⋅ 256= GS w n FS g3 m a1 a2 a3 a4 nL nH d1…dk RangeReference FS g4 m a1 a2 a3 a4 nL nH FS g3 P n m Page Q n xL xH yL yH d1…dk 1… xL xH yL yH d1…dk n Page Related Commands FS p