Citizen Systems PPU-231II manual ESC 3 n, Default

ESC 3 n

[Function]	Setting line feed rate of minimum pitch
[Code]	<1B>H<33>H<n>
[Range]	0 n 255
[Outline]	Sets the line feed width per line to [n ⋅ basic calculation pitch]
	inches.
[Caution]	The line feed width can be set separately for the STANDARD
	and PAGE MODES.
	The basic calculation pitch is set by GS P. Once defined, the line
	feed width is not changed if the basic calculation pitch is changed
	by GS P.
	Fractions resulting from calculation are corrected with the
	minimum pitch of the mechanism, and the remainder is omitted.
	• In STANDARD MODE, this command uses the vertical (Paper
	feed direction) basic calculation pitch (y).
	• In PAGE MODE, this command acts differently depending on
	the start point:
	(1) If the start point specified by ESC T is top left or bottom
	right, the command uses the vertical (Paper feed direction)
	basic calculation pitch (y).
	(2) If the start point specified by ESC T is top right or bottom
	left, the command uses the horizontal (Perpendicular to
	the paper feed direction) basic calculation pitch (x).
	The maximum settable line feed width is 1016 mm (40 inches).
	A setting greater than this maximum is trimmed to the
	maximum.
[Default]	Approx 4.23 mm
[See Also]	ESC 2, GS P

— 28 —