Citizen Systems PPU-231II manual GS H n, Range Outline

GS H n

[Function]	Selecting of printing position of HRI characters
[Code]	<1D>H<48>H<n>
[Range]	0	n	3
	48	n	51
[Outline]	Selecting printing position of HRI characters in printing
	bar codes.
	• “n” means the followings.
		n	Printing Position
	0,48		No printing
	1,49		Above the bar code
	2,50		Below the bar code
	3,51		Both above and below the bar code
[Caution]	• The HRI characters refer to the bar code-turned characters so
	that you can read them.

•The HRI characters are printed in the font selected with GS f.

•Specify before the GS k command.

[Default]	n = 0
[See Also]	GS f, GS k
[Sample Program]	LPRINT CHR$(&H1B) + “3” + CHR$(5);
	LPRINT CHR$(&H1D) + “h” + CHR$(50);
	LPRINT CHR$(&H1D) + “H” + CHR$(0);
	GOSUB BC
	LPRINT CHR$(&H1D) + “H” + CHR$(1);
	GOSUB BC
	LPRINT CHR$(&H1D) + “H” + CHR$(2);
	GOSUB BC
	LPRINT CHR$(&H1D) + “H” + CHR$(3);
	GOSUB BC
	END
	BC:
	LPRINT CHR$(&H1D) + “k”;
	LPRINT CHR$(4);
	LPRINT “12” + CHR$(0);
	LPRINT CHR$(&HA);
	RETURN

— 63 —