Citizen Systems PPU-231II manual ESC T n

ESC T n

[Function]	Selecting the character printing direction in PAGE MODE
[Code]	<1B>H<54>H<n>
[Range]	0	n	3
	48	n	51

[Outline]	Selects the direction and start point of character printing in
	PAGE MODE.
	n	Printing direction		Start point
	0, 48	Left to right		Top left (“A” in the figure)
	1, 49	Bottom to top		Bottom left (“B” in the figure)
	2, 50	Right to left		Bottom right (“C” in the figure)
	3, 51	Top to bottom		Top right (“D” in the figure)
				Reference
			<
			<

Paper Feed Direction

Print Area

[Caution]	• When STANDARD MODE is selected, this command only
	executes the internal flagging of the printer without affecting
	the printing in STANDARD MODE.
	• The character mapping position will be the start point of the
	print area specified by ESC W.
	• The basic calculation pitch (x or y) used by the following
	commands varies with the start point.
	(1) If the start point is the top left or bottom right (The
	characters are mapped in the direction perpendicular to
	the paper feed),
	• Commands using x: ESC SP, ESC S, ESC \
	• Commands using y: ESC 3, ESC J, GS $, GS \
	(2) If the start point is the top right or bottom left (The
	characters are mapped in the paper feed direction),
	• Commands using x: ESC 3, ESC J, GS $, GS \
	• Commands using y: ESC SP, ESC S, ESC \
[Default]	n = 0
[See Also]	ESC $, ESC L, ESC W, ESC \, GS $, GS P, GS \

— 40 —