Chapter 1 Setup
2 Part Names and Functions
Rear view
3 |
2 |
5 |
4 |
1 |
1 Serial interface connector
To connect the serial interface cable.
2 Parallel interface connector
To connect the parallel interface cable.
3 Power switch
To turn on or off the power. (See Chapter 2.)
4 Power inlet
To connect the power cord.
5 PCMCIA memory card cover
To protect the PCMCIA memory card from exposure to dust and foreign matter. To install a PCMCIA memory card, first unhook this cover, then slide it out. (See Appendixes.)
CAUTION
•When opening the cover, open it all the way. If only part way open, the cover could slam shut, possibly causing injury.
•Be careful of the edge of the cover when the cover is opened. It may cause injury or property damage.
•Be careful of the edges of the plates so injury or property damage is possible.
4