Citizen CLP-7002, CLP-7401, CLP-7001 user manual Returning to Factory Setting

Chapter 2 PrinterOparetion

6 Returning to Factory Setting

To return the configuration already set in the printer setup mode or system maintenance mode to the factory setting, proceed as follows:

Turn off the power switch. Press and hold the Pause, Feed and Stop keys simultaneously while turning on the power switch, and further continue holding down those keys.

Press and hold those keys simultaneously while turning on the power switch

You hear a ‘Pi’ sound. Further continue holding down those keys

When you again hear a ‘Pi’ sound, the operation is completed

Factory setting

Printer setup mode			System maintenance mode
Mode item	Indication	Mode	item	Indication
Printing mode	Transfer	Baud	rate	9600bps
Peeling sensor	PeelOFF	Data	length	8bits
Auto-cutter	CutOFF	Native		NativeON
Tearing	TearOFF	Feed	amount	fVirtual
Sensor selection	Edge	Command code		CmndSTD
Interpreter	INTP STD	Adjustable sensor		AJSensOF
		Voltage setting		PE ∗.∗∗ V

29