Citizen CLP-7401, CLP-7001, CLP-7002 user manual Self-Test Mode

Chapter 2 PrinterOparetion

4 Self-Test Mode

In this mode, self-test printing is performed. With this test printing, you can check the current printer configuration settings and print quality. After loading the paper and ribbon, operate the printer as follows:

1. Press and hold the Feed key while turning the printer on.

When label paper is used: Hold down the Feed key for two (2) seconds and the printer will feed the paper and print samples 1 and 2 and stop.

When continuous paper is used: Hold down the Feed key for four (4) seconds and the printer will feed the paper and print samples 1 and 2 and stop.

ROM version No.

Date and time

ROM checksum

RAM check

Communication setting

Print mode

Media sensor voltage

Head rank and resistance value

Peeling sensor

Auto-cutter

Ribbon sensor

Total travel distance

Sample 1

24