Chapter 3 Paper and Ribbon
3Media Handling (When Using Adjustable Sensor)
The adjustable sensor is the standard for CLP
Check that the adjustable sensor is set to ‘AJSensON.’ (See Chapter 2.)
|
|
|
|
|
| Minimum value mm (in) | Maximum value mm (in) | ||
A | Label | width |
| 25.40 | (1.0) | 118.00 | (4.65) | ||
B | Liner | width |
|
| 25.40 | (1.0) | 118.00 | (4.65) | |
C | Label | left edge | position | 0 |
| 2.54 | (0.10) | ||
D | Label | paper gap length | 2.54 | (0.10) | 2539.00 | (99.96) | |||
E | Label | length |
| 12.70 | (0.50) | 2539.00 | (99.96) | ||
F | Label | pitch |
|
| 12.70 | (0.50) | 2539.00 | (99.96 | |
G | Liner | thickness |
| 0.06 | (0.0025) | 0.125 | (0.0049) | ||
H | Paper | thickness |
| 0.06 | (0.0025) | 0.25 | (0.01) | ||
I | Notch | right | end | position | 3.6 | (0.14) | 60.8 | (2.39) | |
J | Notch | left | end | position | 0 |
| 57.2 | (2.25) | |
K | Notch | length |
| 2.54 | (0.10) | 17.80 | (0.70) | ||
L | Black line right end position | 15.00 | (0.59) | 66.5 | (2.62) | ||||
M | Black line left end position | 0 |
| 51.5 | (2.02) | ||||
N | Black | line | width | 3.18 | (0.125) | 17.80 | (0.70) | ||
Note: | • | Paper having both label paper gap and black line should use the |
| ||||||
| • | Fanfold should use the |
|
|
| ||||
Size of paper
Printable area
Label paper | Continuous paper | |
| ||
| Notch detection | Black line detection |
Label |
| Printable |
|
| |
|
| area |
Label |
|
|
|
| Black line |
|
| OD value: 1.5 or |
|
| more |
Label |
| Carbon black ink |
Using paper gap | Using paper gap | Using black line |
adjustment sensor | adjustment sensor | adjustment sensor |
Direction of paper feed
2.5mm 104.0mm (11.5mm)
Left margin | Printable area | Right margin |
36