|
|
| Chapter 2 PrinterOparetion | |
|
|
| 4 | |
| Check the following items in the |
|
| |
| Check item | Cause | Remedy | |
| Dot missing | Head disconnected | Replace head | |
|
|
|
| |
|
| Dust adhered | Clean head(→Section 5 Chapter 4) | |
| Totally blurred | Head offset changed in position | Adjust head offset (→Section 1 Chapter 4) | |
|
| Printing energy low | Adjust printing energy | |
|
| (→Command Reference) | ||
|
|
| ||
| Partially blurred | Head pressure unbalanced | Adjust head pressure | |
|
|
| (→Section 2 Chapter 4) | |
| Ribbon wrinkling and | Ribbon tension improper | Adjust ribbon tension | |
| slipping | (→Section 3 Chapter 4) | ||
|
| |||
Sample 2
203 dpi
Sample 2
400dpi
2.After
The communication contents can be checked by printing the communication data in ASCII code.
3. Return to normal operating mode after turning off the power switch.
25