Shell Object Commands
background tasks. (Definitions of the unit statuses are available in the 3ware Serial ATA RAID Controller User Guide.)
For a system with an enclosure unit that includes support for an EPCT (Enclosure Port Configuration Table), applicable firmware and software, and an appropriate controller (9550SX, 9590SE, or 9650SE), a global view of the environment also includes summary information about detected enclosures.
Example:
Typical output of the Show command for a system with an enclosure looks like the following:
//localhost> show
Ctl Model Ports Drives Units NotOpt RRate VRate BBU
c0 | 4 | 2 | 1 | 0 | 4 | 4 | - | ||
Encl | Slots | Drives | Fans | TSUnits |
| Ctls |
|
|
|
|
|
| |||||||
e0 | 4 | 2 | 1 | 1 |
| 1 |
|
|
|
The output above shows the enclosure summary information with the name of the enclosure, the protocol used, the number of drive slots, the number of drives, the number of fans, the number of temperature sensors, and the number of controllers that are associated with the enclosure.
show ver
This command will show the CLI and API version.
Example:
//localhost> show ver CLI Version = 2.00.03.0xx API Version = 2.01.00.xx
In the above example, “xx” stands for the actual version. See the Release
Notes for details.
www.3ware.com | 25 |