AMCC 9550SX, 9500S, 9590SE, 9650SE manual Cx show allunitstatus, Cx show drivestatus

Chapter 2. CLI Syntax Reference

/cx show allunitstatus

This command presents a count of total and Not Optimal units managed by the specified controller /cx. For more about the meaning of Not Optimal, see “Shell Object Commands” on page 23.

Example:

//localhost> /c0 show allunitstatus /c0 Total Optimal Units = 2

/c0 Not Optimal Units = 0

/cx show drivestatus

This command reports a list of drives and their port assignment, status, the unit with which they are associated, their size in gigabytes and blocks, and the serial number assigned by the drive manufacturer. (Definitions of the drive statuses are available in the 3ware Serial ATA RAID Controller User Guide.)

Example:

//localhost> /c0 show drivestatus
Port Status	Unit Size	Blocks	Serial

--------------------------------------------------------------

p0	OK	u0	149.05	GB	312581808	3JS0TF14
p1	OK	u0	149.05	GB	312581808	3JS0TETZ
p2	OK	u1	149.05	GB	312581808	3JS0VG85
p3	OK	u1	149.05	GB	312581808	3JS0VGCY
p4	OK	u1	149.05	GB	312581808	3JS0VGGQ
p5	OK	u2	149.05	GB	312581808	3JS0VH1P
p6	OK	-	149.05	GB	312581808	3JS0TF0P
p7	OK	-	149.05	GB	312581808	3JS0VF43
p8	OK	-	149.05	GB	312581808	3JS0VG8D

p9	NOT-PRESENT	-	-	-	-
p10	NOT-PRESENT	-	-	-	-
p11	NOT-PRESENT	-	-	-	-

38 3ware Serial ATA RAID Controller CLI Guide