AMCC 9650SE, 9550SX Cx show serial, Cx show pcb, Cx show pchip, Cx show achip, Cx show numdrives

Controller Object Commands

/cx show serial

This command reports the serial number of the specified controller /cx.

Example:

//localhost> /c0 show serial

/c0 Serial Number = F12705A3240009

/cx show pcb

This command reports the PCB (Printed Circuit Board) version of the specified controller /cx.

Example:

//localhost> /c0 show pcb /c0 PCB Version = RevX

/cx show pchip

This command reports the PCHIP (PCI Interface Chip) version of the specified controller /cx.

Example:

//localhost> /c0 show pchip /c0 PCHIP Version = 1.x

/cx show achip

This command reports the ACHIP (ATA Interface Chip) version of the specified controller /cx.

Example:

//localhost> /c0 show achip /c0 ACHIP Version = 3.x

/cx show numdrives

This command reports the number of drives currently managed by the specified controller /cx. This report does not include (logically) removed or exported drives.

On 9500S and earlier controllers, physically-removed disk(s) will still be counted. For a workaround, see “/cx/px show smart” on page 79.

Example:

//localhost> /c0 show numdrives /c0 Number of Drives = 5

www.3ware.com 33