Unit Object Commands
/cx/ux start verify
This command starts a background verification process on the specified unit /cx/ux. The following table shows the supported matrix as a function of the controller model and logical unit type.
N/A (Not Applicable) refers to cases where the given logical unit type is not supported on that controller model.
Table 9: Supported RAID (Logical Unit) Types for Verification
Model | R0 | R1 | R5 | R6 | R10 | R50 | Single | JBOD | Spare |
|
|
|
|
|
|
|
|
|
|
7K/8K | No | Yes | Yes | N/A | Yes | N/A | N/A | No | No |
|
|
|
|
|
|
|
|
|
|
9000a | Yes | Yes | Yes | N/A | Yes | Yes | Yes | Yes | Yes |
9650SE | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
|
|
|
|
|
|
|
|
|
|
a. Models 9500S, 9550SX, and 9590SE
When you issue this command, the specified verify will begin if schedules are disabled; otherwise it will pause until the next scheduled verify. Verify will also pause if a rebuild or initialization is currently in progress.
/cx/ux pause rebuild
This command allows you to pause the rebuild operation on the specified unit /cx/ux.
This feature is only supported on the 7000/8000 series controllers. 9000 series controllers have an
/cx/ux resume rebuild
This command allows you to resume the rebuild operation on the specified unit /cx/ux.
This feature is intended only for 7000/8000 series controllers. 9000 series controllers have an
www.3ware.com | 67 |