Matsushita CF-19FHGAX Setting the Power SW PCB, Assembly of the left LED PCB and right LED PCB

■Assembly of the left LED PCB and right LED PCB

LED(L) PCB Ass'y

LED Light Guide Sheet(L)

LED PCB(L)

LED(R) PCB Ass'y
	Match the edge and attach it.
LED Light Guide Sheet(R)

Match the edge and attach it.

Avoid running over the LED.

Back side

03mm

LED PCB Tape(L)

LED(L) FPC

Match the edge and attach it. Ensure it does not come over the end of the Board by 0.5 mm or more. Avoid coming over it.

9.2.9.Setting the Power SW PCB

1.Connect the Cable to the Connector. (CN9)

2.Fix the Power SW PCB using the Screw. <N1>

Screws <N1> : DFHE5025XA

■Assembly of the Power SW PCB

(Note) Arrow without specified measurement: 0 to 0.5 mm

Power SW PCB

01mm

Power Spring Sheet 0 1mm

Attach

Insert

Spring

Insert it to Knob and
Pin on the Top Case	Insert the Cushion
	between the ribs.
	Avoid coming over

S2

Screw

Fold the board back and fix with screw.

LED PCB(R)

LED PWB Tape(R)

Match the edge and attach it.

<N1>

Connector(CN9)

Power SW

PCB

Safety Working

CAUTION	S1:Insulation S2:Pinching Cables S3:Sharp Edge
	S4:Part No. Check S5:Others

47 / 90