Opticon OPR 2001 Interface Specifications, RS-232C Interface Settings and Communication

Page 18

Opticon

OPR 2001

Specifications Manual

8.Interface Specifications

8.1.RS-232C Interface

8.1.1.Settings and Communication

Reading menu barcodes [ZZ] + [U2] + [ZZ] can set the RS-232C interface default.

Item	[U2] setting

Baud rate	9600 BPS

Start/stop bits	1 bit

Data bits	8 bits

Parity bits	No parity

Handshaking	No handshake

Flow control time out	Indefinitely

You can change the communication condition using the menu barcode.

8.1.2.Signal Level

Signal Name	I/O	RS-232C Level (V)

		Mark/OFF	Space/ON

TxD	OUT	-5 to -15	+5 to +15

RxD	IN	-3 to -15	+3 to +15

RTS	OUT	-5 to -15	+5 to +15

CTS	IN	-3 to -15	+3 to +15

Image 18

Contents OPR Document History Limited Warranty and DisclaimersWarranty Copyright 2007 Opticon. All rights reservedContents Cable and Connector Table of Figures Serial number diagram Abstract OverviewPhysical Features Environmental SpecificationsAmbient Light Immunity ConditionsRS-232C Electrical SpecificationsParameter Symbol Min Typ Max Unit USB, WedgeParameter Specification Optical SpecificationsLaser Scanning Specifications Laser Scanning Standard Laser Scanning TiltTechnical Specifications Print Contrast Signal PCSQuiet Zone Scan Area and ResolutionResolution Symbology Digits Depth of Field mmPitch, Skew, and Tilt Pitch Angle PitchSkew Angle and Dead Zone Skew angle and dead zoneTilt Angle Pitch, Skew Angle, Dead ZoneCurvature CurvatureSignal Level Interface SpecificationsRS-232C Interface Settings and Communication U2 settingSignal Pin Pin AssignmentInterface Circuit Communication Format Handshaking Menu/CommandCharacter Format HandshakingFlow Control Time Out Menu/Command BUSY/READYCTS, TXD signal timing ModemACK/NAK Timeout Menu/Command ACK/NAKACK/NAK no Response ACK/NAK-No responseUSB a connector USB Interface Specifications SettingsConnectors USB-HIDDOS/V Wedge Interface Specification Settings Desktop PC When using external keyboardDOS/V Host Connector DOS/V Keyboard ConnectorContact Number Signal Name Cable and Connector RS-232C CableUSB Cable Pin No RS-232C Connector Specification Scanner SideWedge Cable WedgeUSB-HID Default Default SettingsRS-232C Default Wedge Default with external keyboardSymbology Read Transmit Default Settings 1 Readable CodesWedge Default without external keyboard Set Others CodeSymbology Read Transmit Calculate Set Others Code Default Settings 2 Read Options, Trigger, Buzzer Default SettingCollective Packaging Specification Packaging SpecificationsIndividual Packaging Specification Serial NumberShock Drop Test without packaging DurabilityElectrical Noise Drop Test with individual packagingDust and Drip Proof Vibration StrengthStatic Electricity Cable Strength Cable Pulling TestReliability Auto Trigger OptionAuto Trigger Settings Stand Only Trigger optionsAlways ManuallyRegulatory Compliance Laser SafetyProduct Safety EMCShock SafetyTemperature Conditions Foreign MaterialsMechanical Drawing Mechanical drawing

8.Interface Specifications

8.1.RS-232C Interface

8.1.1.Settings and Communication

[U2] setting

8.1.2.Signal Level

Signal Name

RS-232C Level (V)