Opticon OPR 2001 specifications Wedge Cable, Connector Specification Scanner Side, Pin No RS-232C

Page 29

Opticon

OPR 2001

Specifications Manual

9.3.Wedge Cable

(Standard specification)

Type:	Y cable

Diameter:	Φ4.8 ±0.5 mm

Length:	1500 +50, -0 mm

Cores:	6 insulated wires, 1 conductive wire

Weight:	Approximately 50 g

Figure 24: Wedge cable

9.4.Connector Specification (Scanner Side)

CN1 (12-pin)

Pin No	RS-232C	USB	Wedge

1	GND	GND	GND

2	RXD	---	---

3	TXD	---	---

4	CTS	---	---

5	RTS	---	---

6	NC	---	---

7	NC	－DATA	KEY_CLK

8	NC	＋DATA	KEY_DATA

9	NC	---	CPU_CLK

10	NC	---	CPU_DATA

11	VCC	VCC	VCC

12	FG (shield)	FG (shield)	FG (shield)

Image 29

Contents OPR Warranty Limited Warranty and DisclaimersDocument History Copyright 2007 Opticon. All rights reservedContents Cable and Connector Table of Figures Serial number diagram Overview AbstractEnvironmental Specifications Physical FeaturesConditions Ambient Light ImmunityParameter Symbol Min Typ Max Unit Electrical SpecificationsRS-232C USB, WedgeLaser Scanning Specifications Optical SpecificationsParameter Specification Laser Scanning Standard Laser Scanning TiltPrint Contrast Signal PCS Technical SpecificationsResolution Symbology Scan Area and ResolutionQuiet Zone Digits Depth of Field mmPitch Pitch, Skew, and Tilt Pitch AngleSkew angle and dead zone Skew Angle and Dead ZonePitch, Skew Angle, Dead Zone Tilt AngleCurvature CurvatureRS-232C Interface Settings and Communication Interface SpecificationsSignal Level U2 settingInterface Circuit Signal PinPin Assignment Character Format Handshaking Menu/CommandCommunication Format HandshakingBUSY/READY Flow Control Time Out Menu/CommandModem CTS, TXD signal timingACK/NAK ACK/NAK Timeout Menu/CommandACK/NAK-No response ACK/NAK no ResponseConnectors USB Interface Specifications SettingsUSB a connector USB-HIDDesktop PC When using external keyboard DOS/V Wedge Interface Specification SettingsContact Number Signal Name DOS/V Host ConnectorDOS/V Keyboard Connector USB Cable Cable and ConnectorRS-232C Cable Wedge Cable Connector Specification Scanner SidePin No RS-232C WedgeRS-232C Default Default SettingsUSB-HID Default Wedge Default with external keyboardWedge Default without external keyboard Default Settings 1 Readable CodesSymbology Read Transmit Set Others CodeSymbology Read Transmit Calculate Set Others Code Default Setting Default Settings 2 Read Options, Trigger, BuzzerIndividual Packaging Specification Packaging SpecificationsCollective Packaging Specification Serial NumberElectrical Noise DurabilityShock Drop Test without packaging Drop Test with individual packagingStatic Electricity Vibration StrengthDust and Drip Proof Cable Strength Cable Pulling TestAuto Trigger Option ReliabilityTrigger options Auto Trigger Settings Stand OnlyManually AlwaysProduct Safety Laser SafetyRegulatory Compliance EMCTemperature Conditions SafetyShock Foreign MaterialsMechanical drawing Mechanical Drawing