Opticon OPR 2001 specifications Durability, Electrical Noise, Shock Drop Test without packaging

Page 35

Opticon

OPR 2001

Specifications Manual

13.Durability

13.1.Electrical Noise

No malfunction occurred when sinusoidal electrical noise (10Hz -100kHz, < 0.1Vpp) was added to a power supply line.

Conditions

Barcode Sample: OPTOELECTRONICS Test Sample

PCS:	0.9
Resolution:	0.25 mm
Symbology:	9-digit Code-39
Quiet Zone:	10 mm
N/W Ratio:	1:2.5
Distance:	90 mm
Angle:	α = 0° β = 15° γ = 0°
Curvature:	R = ∞
Power Supply Voltage:	5.0 V

13.2.Shock

13.2.1.Drop Test (without packaging)

No malfunction occurred after the following drop test.

Drop Test: Drop the scanner from a height of 150 cm onto a concrete floor three times on each of 5 sides.

Figure 26: Drop test

13.2.2.Drop Test (with individual packaging)

No malfunction occurred after the following drop test.

Drop Test: Drop the scanner from a height of 150 cm onto a concrete floor on each of one corner, three edges, and six sides (10 drop tests in total).

Image 35

Contents OPR Copyright 2007 Opticon. All rights reserved Limited Warranty and DisclaimersWarranty Document HistoryContents Cable and Connector Table of Figures Serial number diagram Overview AbstractEnvironmental Specifications Physical FeaturesConditions Ambient Light ImmunityUSB, Wedge Electrical SpecificationsParameter Symbol Min Typ Max Unit RS-232CLaser Scanning Standard Laser Scanning Tilt Optical SpecificationsLaser Scanning Specifications Parameter SpecificationPrint Contrast Signal PCS Technical SpecificationsDigits Depth of Field mm Scan Area and ResolutionResolution Symbology Quiet ZonePitch Pitch, Skew, and Tilt Pitch AngleSkew angle and dead zone Skew Angle and Dead ZonePitch, Skew Angle, Dead Zone Tilt AngleCurvature CurvatureU2 setting Interface SpecificationsRS-232C Interface Settings and Communication Signal LevelInterface Circuit Signal PinPin Assignment Handshaking Handshaking Menu/CommandCharacter Format Communication FormatBUSY/READY Flow Control Time Out Menu/CommandModem CTS, TXD signal timingACK/NAK ACK/NAK Timeout Menu/CommandACK/NAK-No response ACK/NAK no ResponseUSB-HID USB Interface Specifications SettingsConnectors USB a connectorDesktop PC When using external keyboard DOS/V Wedge Interface Specification SettingsContact Number Signal Name DOS/V Host ConnectorDOS/V Keyboard Connector USB Cable Cable and ConnectorRS-232C Cable Wedge Connector Specification Scanner SideWedge Cable Pin No RS-232CWedge Default with external keyboard Default SettingsRS-232C Default USB-HID DefaultSet Others Code Default Settings 1 Readable CodesWedge Default without external keyboard Symbology Read TransmitSymbology Read Transmit Calculate Set Others Code Default Setting Default Settings 2 Read Options, Trigger, BuzzerSerial Number Packaging SpecificationsIndividual Packaging Specification Collective Packaging SpecificationDrop Test with individual packaging DurabilityElectrical Noise Shock Drop Test without packagingCable Strength Cable Pulling Test Vibration StrengthStatic Electricity Dust and Drip ProofAuto Trigger Option ReliabilityTrigger options Auto Trigger Settings Stand OnlyManually AlwaysEMC Laser SafetyProduct Safety Regulatory ComplianceForeign Materials SafetyTemperature Conditions ShockMechanical drawing Mechanical Drawing