Opticon OPR 2001 specifications Default Settings 2 Read Options, Trigger, Buzzer

Opticon

OPR 2001

Specifications Manual

10.3. Default Settings 2: Read Options, Trigger, Buzzer

Item		Default Setting
Setting the number of characters		Fixed length OFF all codes
Read mode		Single read
Multiple read reset time		500 ms
Add-on wait time		500 ms
Multiple columns read		Disabled
	Default option	Read 1 times, redundancy = 0
	([X0] setting)
	Other options	Read n times, redundancy = n+1
	([X1 .. X3] setting)	for following symbologies and lengths:
	([BS .. BW] setting)	● Code39 with length <= 5
Redundancy		● MSI/Plessey with length <= 4
		● IATA,Industrial 2of5, Interleaved 2of5
		with length <= 8
		● Matrix 2of5 (& Chin.Post), Scode
		with length <= 8
		● Codabar (NW7) with all lengths
		● Code-11 with length <= 5
Trigger switch		Enabled
Trigger repeat		Disable trigger repeat
Auto trigger		Disable auto trigger
Margin check		Margin check normal
Buzzer duration		50 ms
Buzzer tone		3 kHz (single tone)
Buzzer loudness		Loud (Maximum)
Buzzer timing		Buzzer before transmission
Startup buzzer		Enable startup buzzer
Indicator duration		200 ms

33