Opticon OPR 2001 specifications Safety, Shock, Temperature Conditions, Foreign Materials, Other

Page 41

Opticon

OPR 2001

Specifications Manual

17. Safety

Handle this product carefully. Do not deliberately subject it to any of the following.

17.1.Shock

•Do not throw or drop the scanner.

•Do not place heavy objects on the cables.

17.2.Temperature Conditions

•Do not use the scanner at temperatures outside the specified range.

•Do not pour boiling water on the scanner.

•Do not throw the scanner into the fire.

•Do not forcibly bend the cables at low temperatures.

17.3.Foreign Materials

•Do not immerse the scanner in liquids.

•Do not subject the scanner to chemicals.

17.4.Other

•Do not plug/unplug the connectors before disconnecting the power.

•Do not disassemble this product.

•Do not use the scanner near a radio or a TV receiver. It may cause reception problems.

•The scanner may be damaged by voltage drops.

•The scanner may not perform properly in environments when placed near a flickering light, such as a computer monitor, television, etc.

Image 41

Contents OPR Warranty Limited Warranty and DisclaimersDocument History Copyright 2007 Opticon. All rights reservedContents Cable and Connector Table of Figures Serial number diagram Overview AbstractEnvironmental Specifications Physical FeaturesConditions Ambient Light ImmunityParameter Symbol Min Typ Max Unit Electrical SpecificationsRS-232C USB, WedgeLaser Scanning Specifications Optical SpecificationsParameter Specification Laser Scanning Standard Laser Scanning TiltPrint Contrast Signal PCS Technical SpecificationsResolution Symbology Scan Area and ResolutionQuiet Zone Digits Depth of Field mmPitch Pitch, Skew, and Tilt Pitch AngleSkew angle and dead zone Skew Angle and Dead ZonePitch, Skew Angle, Dead Zone Tilt AngleCurvature CurvatureRS-232C Interface Settings and Communication Interface SpecificationsSignal Level U2 settingInterface Circuit Signal PinPin Assignment Character Format Handshaking Menu/CommandCommunication Format HandshakingBUSY/READY Flow Control Time Out Menu/CommandModem CTS, TXD signal timingACK/NAK ACK/NAK Timeout Menu/CommandACK/NAK-No response ACK/NAK no ResponseConnectors USB Interface Specifications SettingsUSB a connector USB-HIDDesktop PC When using external keyboard DOS/V Wedge Interface Specification SettingsContact Number Signal Name DOS/V Host ConnectorDOS/V Keyboard Connector USB Cable Cable and ConnectorRS-232C Cable Wedge Cable Connector Specification Scanner SidePin No RS-232C WedgeRS-232C Default Default SettingsUSB-HID Default Wedge Default with external keyboardWedge Default without external keyboard Default Settings 1 Readable CodesSymbology Read Transmit Set Others CodeSymbology Read Transmit Calculate Set Others Code Default Setting Default Settings 2 Read Options, Trigger, BuzzerIndividual Packaging Specification Packaging SpecificationsCollective Packaging Specification Serial NumberElectrical Noise DurabilityShock Drop Test without packaging Drop Test with individual packagingStatic Electricity Vibration StrengthDust and Drip Proof Cable Strength Cable Pulling TestAuto Trigger Option ReliabilityTrigger options Auto Trigger Settings Stand OnlyManually AlwaysProduct Safety Laser SafetyRegulatory Compliance EMCTemperature Conditions SafetyShock Foreign MaterialsMechanical drawing Mechanical Drawing