Opticon OPR 2001 USB Interface Specifications Settings, Connectors, Usb-Hid, Usb-Vcp

Page 25

Opticon

OPR 2001

Specifications Manual

8.2.USB Interface Specifications

8.2.1.Settings

a)USB-HID

Reading menu barcodes [ZZ] + [SU] + [ZZ] can set the USB-HID interface default.

The OPR 2001 USB model uses a full-speed USB interface.

b)USB-VCP

Reading menu barcodes [ZZ] + [C01] + [ZZ] can set the USB-VCP interface default.

The OPR 2001 USB model uses a full-speed USB interface. Note: You must install the USB-VCP driver on the host

8.2.2.Connectors

a)USB "A" connector

	Figure 18: USB "A" connector

Contact Number	Signal Name

1	VCC

2	-DATA

3	+DATA

4	GND

Image 25

Contents OPR Warranty Limited Warranty and DisclaimersDocument History Copyright 2007 Opticon. All rights reservedContents Cable and Connector Table of Figures Serial number diagram Overview AbstractEnvironmental Specifications Physical FeaturesConditions Ambient Light ImmunityParameter Symbol Min Typ Max Unit Electrical SpecificationsRS-232C USB, WedgeLaser Scanning Specifications Optical SpecificationsParameter Specification Laser Scanning Standard Laser Scanning TiltPrint Contrast Signal PCS Technical SpecificationsResolution Symbology Scan Area and ResolutionQuiet Zone Digits Depth of Field mmPitch Pitch, Skew, and Tilt Pitch AngleSkew angle and dead zone Skew Angle and Dead ZonePitch, Skew Angle, Dead Zone Tilt AngleCurvature CurvatureRS-232C Interface Settings and Communication Interface SpecificationsSignal Level U2 settingPin Assignment Signal PinInterface Circuit Character Format Handshaking Menu/CommandCommunication Format HandshakingBUSY/READY Flow Control Time Out Menu/CommandModem CTS, TXD signal timingACK/NAK ACK/NAK Timeout Menu/CommandACK/NAK-No response ACK/NAK no ResponseConnectors USB Interface Specifications SettingsUSB a connector USB-HIDDesktop PC When using external keyboard DOS/V Wedge Interface Specification SettingsDOS/V Keyboard Connector DOS/V Host ConnectorContact Number Signal Name RS-232C Cable Cable and ConnectorUSB Cable Wedge Cable Connector Specification Scanner SidePin No RS-232C WedgeRS-232C Default Default SettingsUSB-HID Default Wedge Default with external keyboardWedge Default without external keyboard Default Settings 1 Readable CodesSymbology Read Transmit Set Others CodeSymbology Read Transmit Calculate Set Others Code Default Setting Default Settings 2 Read Options, Trigger, BuzzerIndividual Packaging Specification Packaging SpecificationsCollective Packaging Specification Serial NumberElectrical Noise DurabilityShock Drop Test without packaging Drop Test with individual packagingStatic Electricity Vibration StrengthDust and Drip Proof Cable Strength Cable Pulling TestAuto Trigger Option ReliabilityTrigger options Auto Trigger Settings Stand OnlyManually AlwaysProduct Safety Laser SafetyRegulatory Compliance EMCTemperature Conditions SafetyShock Foreign MaterialsMechanical drawing Mechanical Drawing