Opticon OPR 2001 Optical Specifications, Laser Scanning Specifications, Scanning Curvature

Opticon

OPR 2001

Specifications Manual

6.Optical Specifications

6.1. Laser Scanning Specifications

Parameter	Specification
Light-emitting element	Red laser diode
Emission wavelength	650 ±10 (25° C)
Light output	1.0 or less
Scanning method	Bi-directional scanning
Scanning speed	100 ±20
Scan angle	Scan angle: 54 ±5
	Read angle: 44 (Min)

Unit

-

nm

mW

-

scans/s

°

°

6.2.Laser Scanning Standard

6.2.1.Laser Scanning Tilt

Scanning tilt is the vertical difference between the ends of a laser scan line.

•Up to 0.92° in a vertical direction from the scan origin (mirror motor mirror).

•Up to 2.46 mm when measured at 150 mm from the scan origin. Measurement is done at the center of the laser scan line.

6.2.2.Scanning Curvature

Scanning curvature is the maximum difference between the laser scan line and the line between the ends of the laser scan line.

•Up to 1.17° in a vertical direction from the scan origin (mirror motor mirror).

•Up to 3.06 mm when measured at 150 mm from the scan origin. Measurement is done from the center of the laser scan line.

Figure 2: Laser scanning tilt and curvature

11