Opticon OPR 2001 specifications Vibration Strength, Static Electricity, Dust and Drip Proof

Page 36

Opticon

OPR 2001

Specifications Manual

13.3.Vibration Strength

No malfunction occurred after the following vibration test.

Vibration Test: Increase the frequency of the vibration from 10 Hz to 100 Hz with accelerated velocity 19.6m/s2 (2G) for 60 minutes in non-operating state. Repeat this routine in each X, Y, Z direction once for 60 minutes each.

13.4.Static Electricity

Air discharge:	10 kV Max. (No malfunction)
	15 kV Max. (No destruction)
Measurement environment:	Use electrostatic testing device compliant with IEC 61000-4-2
Discharge resistance:	330 Ω
Capacitor charging:	150 pF

13.5.Dust and Drip Proof

IEC IP42

13.6.Cable Strength

13.6.1.Cable Pulling Test

No malfunction occurred after the following pulling test.

Pulling test: Fix the scanner and pull the cable with the force of 2.5 kg (24.5N) for 1 second. Repeat 20 times.

13.6.2.Cable Tail Bending Test

No malfunction occurred after the following bending test.

Bending test: Fix the scanner and attach a weight of 500 grams (4.9N); swing the cable back and forth at an angle of 90°. Repeat it 1,000,000 times.

Figure 27: Cable tail bending test

36

Image 36

Contents OPR Limited Warranty and Disclaimers WarrantyDocument History Copyright 2007 Opticon. All rights reservedContents Cable and Connector Table of Figures Serial number diagram Abstract OverviewPhysical Features Environmental SpecificationsAmbient Light Immunity ConditionsElectrical Specifications Parameter Symbol Min Typ Max UnitRS-232C USB, WedgeOptical Specifications Laser Scanning SpecificationsParameter Specification Laser Scanning Standard Laser Scanning TiltTechnical Specifications Print Contrast Signal PCSScan Area and Resolution Resolution SymbologyQuiet Zone Digits Depth of Field mmPitch, Skew, and Tilt Pitch Angle PitchSkew Angle and Dead Zone Skew angle and dead zoneTilt Angle Pitch, Skew Angle, Dead ZoneCurvature CurvatureInterface Specifications RS-232C Interface Settings and CommunicationSignal Level U2 settingSignal Pin Pin AssignmentInterface Circuit Handshaking Menu/Command Character FormatCommunication Format HandshakingFlow Control Time Out Menu/Command BUSY/READYCTS, TXD signal timing ModemACK/NAK Timeout Menu/Command ACK/NAKACK/NAK no Response ACK/NAK-No responseUSB Interface Specifications Settings ConnectorsUSB a connector USB-HIDDOS/V Wedge Interface Specification Settings Desktop PC When using external keyboardDOS/V Host Connector DOS/V Keyboard ConnectorContact Number Signal Name Cable and Connector RS-232C CableUSB Cable Connector Specification Scanner Side Wedge CablePin No RS-232C WedgeDefault Settings RS-232C DefaultUSB-HID Default Wedge Default with external keyboardDefault Settings 1 Readable Codes Wedge Default without external keyboardSymbology Read Transmit Set Others CodeSymbology Read Transmit Calculate Set Others Code Default Settings 2 Read Options, Trigger, Buzzer Default SettingPackaging Specifications Individual Packaging SpecificationCollective Packaging Specification Serial NumberDurability Electrical NoiseShock Drop Test without packaging Drop Test with individual packagingVibration Strength Static ElectricityDust and Drip Proof Cable Strength Cable Pulling TestReliability Auto Trigger OptionAuto Trigger Settings Stand Only Trigger optionsAlways ManuallyLaser Safety Product SafetyRegulatory Compliance EMCSafety Temperature ConditionsShock Foreign MaterialsMechanical Drawing Mechanical drawing