Opticon OPR 2001 specifications Character Format, Communication Format, No Handshaking

Page 20

Opticon

OPR 2001

Specifications Manual

8.1.5.Character Format

Figure 9:Character format (same for both sending and receiving)

8.1.6.Communication Format

Figure 10: Communication format

8.1.7.Handshaking

Select handshaking options using the menu or command listed below.

Handshaking

Menu/Command

No handshake

P0

BUSY/READY

P1

MODEM

P2

ACK/NAK

P3

ACK/NAK NO RESPONSE

P4

a)No Handshaking

The scanner attempts the communication regardless of the state of the host computer.

Figure 11: No handshaking

20

Image 20
Contents OPR Limited Warranty and Disclaimers WarrantyDocument History Copyright 2007 Opticon. All rights reservedContents Cable and Connector Table of Figures Serial number diagram Abstract OverviewPhysical Features Environmental SpecificationsAmbient Light Immunity ConditionsElectrical Specifications Parameter Symbol Min Typ Max UnitRS-232C USB, WedgeOptical Specifications Laser Scanning SpecificationsParameter Specification Laser Scanning Standard Laser Scanning TiltTechnical Specifications Print Contrast Signal PCSScan Area and Resolution Resolution SymbologyQuiet Zone Digits Depth of Field mmPitch, Skew, and Tilt Pitch Angle PitchSkew Angle and Dead Zone Skew angle and dead zoneTilt Angle Pitch, Skew Angle, Dead ZoneCurvature CurvatureInterface Specifications RS-232C Interface Settings and CommunicationSignal Level U2 settingInterface Circuit Signal PinPin Assignment Handshaking Menu/Command Character FormatCommunication Format HandshakingFlow Control Time Out Menu/Command BUSY/READYCTS, TXD signal timing ModemACK/NAK Timeout Menu/Command ACK/NAKACK/NAK no Response ACK/NAK-No responseUSB Interface Specifications Settings ConnectorsUSB a connector USB-HIDDOS/V Wedge Interface Specification Settings Desktop PC When using external keyboardContact Number Signal Name DOS/V Host ConnectorDOS/V Keyboard Connector USB Cable Cable and ConnectorRS-232C Cable Connector Specification Scanner Side Wedge CablePin No RS-232C WedgeDefault Settings RS-232C DefaultUSB-HID Default Wedge Default with external keyboardDefault Settings 1 Readable Codes Wedge Default without external keyboardSymbology Read Transmit Set Others CodeSymbology Read Transmit Calculate Set Others Code Default Settings 2 Read Options, Trigger, Buzzer Default SettingPackaging Specifications Individual Packaging SpecificationCollective Packaging Specification Serial NumberDurability Electrical NoiseShock Drop Test without packaging Drop Test with individual packagingVibration Strength Static ElectricityDust and Drip Proof Cable Strength Cable Pulling TestReliability Auto Trigger OptionAuto Trigger Settings Stand Only Trigger optionsAlways ManuallyLaser Safety Product SafetyRegulatory Compliance EMCSafety Temperature ConditionsShock Foreign MaterialsMechanical Drawing Mechanical drawing