Opticon OPR 2001 specifications Electrical Specifications, RS-232C, USB, Wedge

Page 10

Opticon

OPR 2001

Specifications Manual

5.Electrical Specifications

5.1. RS-232C

Parameter	Symbol	Min	Typ	Max	Unit	Notes

Power supply voltage	VDD	4.5	6.0	6.5	V

Operating current	IOP	-	90	150	mA	No buzzer

Peak current	IPEAK	-	550	600	mA

Standby current	IPRE	-	35	70	mA

Startup time	TD	-	100	-	ms

5.2. USB, Wedge

Parameter	Symbol	Min	Typ	Max	Unit	Notes

Power supply voltage	VDD	4.5	5.0	5.5	V

Operating current	IOP	-	90	150	mA	No buzzer

Peak current	IPEAK	-	450	500	mA

Standby current	IPRE	-	35	70	mA

Startup time	TD	-	100	-	ms

Conditions

•Connect 1Ω resistance to a power supply line in series and measure the current by the voltage between both ends of resistance.

•Power supply voltage is measured at a connector terminal area.

•The current value depends on the interface type and host computer to which the device is connected.

Image 10

Contents OPR Document History Limited Warranty and DisclaimersWarranty Copyright 2007 Opticon. All rights reservedContents Cable and Connector Table of Figures Serial number diagram Abstract OverviewPhysical Features Environmental SpecificationsAmbient Light Immunity ConditionsRS-232C Electrical SpecificationsParameter Symbol Min Typ Max Unit USB, WedgeParameter Specification Optical SpecificationsLaser Scanning Specifications Laser Scanning Standard Laser Scanning TiltTechnical Specifications Print Contrast Signal PCSQuiet Zone Scan Area and ResolutionResolution Symbology Digits Depth of Field mmPitch, Skew, and Tilt Pitch Angle PitchSkew Angle and Dead Zone Skew angle and dead zoneTilt Angle Pitch, Skew Angle, Dead ZoneCurvature CurvatureSignal Level Interface SpecificationsRS-232C Interface Settings and Communication U2 settingPin Assignment Signal PinInterface Circuit Communication Format Handshaking Menu/CommandCharacter Format HandshakingFlow Control Time Out Menu/Command BUSY/READYCTS, TXD signal timing ModemACK/NAK Timeout Menu/Command ACK/NAKACK/NAK no Response ACK/NAK-No responseUSB a connector USB Interface Specifications SettingsConnectors USB-HIDDOS/V Wedge Interface Specification Settings Desktop PC When using external keyboardDOS/V Keyboard Connector DOS/V Host ConnectorContact Number Signal Name RS-232C Cable Cable and ConnectorUSB Cable Pin No RS-232C Connector Specification Scanner SideWedge Cable WedgeUSB-HID Default Default SettingsRS-232C Default Wedge Default with external keyboardSymbology Read Transmit Default Settings 1 Readable CodesWedge Default without external keyboard Set Others CodeSymbology Read Transmit Calculate Set Others Code Default Settings 2 Read Options, Trigger, Buzzer Default SettingCollective Packaging Specification Packaging SpecificationsIndividual Packaging Specification Serial NumberShock Drop Test without packaging DurabilityElectrical Noise Drop Test with individual packagingDust and Drip Proof Vibration StrengthStatic Electricity Cable Strength Cable Pulling TestReliability Auto Trigger OptionAuto Trigger Settings Stand Only Trigger optionsAlways ManuallyRegulatory Compliance Laser SafetyProduct Safety EMCShock SafetyTemperature Conditions Foreign MaterialsMechanical Drawing Mechanical drawing