Opticon OPR 2001 specifications Pin Assignment, Interface Circuit, Signal Pin

Page 19

Opticon

OPR 2001

Specifications Manual

8.1.3.Pin Assignment

Signal	Pin	Notes

NC	1	Open (not connected)

TXD	2

RXD	3

---	4	Connected to pin 6 with jumper cable.

GND	5

---	6	Connected to pin 4 with jumper cable.

CTS	7

RTS	8

NC	9	Open (not connected)

FG	SHELL	Shield

Connector: D-sub, 9-pin, Female

Power supply: DC jack, EIAJ voltage Class 2

8.1.4.Interface Circuit

Figure 8: Interface circuit

Image 19

Contents OPR Copyright 2007 Opticon. All rights reserved Limited Warranty and DisclaimersWarranty Document HistoryContents Cable and Connector Table of Figures Serial number diagram Overview AbstractEnvironmental Specifications Physical FeaturesConditions Ambient Light ImmunityUSB, Wedge Electrical SpecificationsParameter Symbol Min Typ Max Unit RS-232CLaser Scanning Standard Laser Scanning Tilt Optical SpecificationsLaser Scanning Specifications Parameter SpecificationPrint Contrast Signal PCS Technical SpecificationsDigits Depth of Field mm Scan Area and ResolutionResolution Symbology Quiet ZonePitch Pitch, Skew, and Tilt Pitch AngleSkew angle and dead zone Skew Angle and Dead ZonePitch, Skew Angle, Dead Zone Tilt AngleCurvature CurvatureU2 setting Interface SpecificationsRS-232C Interface Settings and Communication Signal LevelPin Assignment Signal PinInterface Circuit Handshaking Handshaking Menu/CommandCharacter Format Communication FormatBUSY/READY Flow Control Time Out Menu/CommandModem CTS, TXD signal timingACK/NAK ACK/NAK Timeout Menu/CommandACK/NAK-No response ACK/NAK no ResponseUSB-HID USB Interface Specifications SettingsConnectors USB a connectorDesktop PC When using external keyboard DOS/V Wedge Interface Specification SettingsDOS/V Keyboard Connector DOS/V Host ConnectorContact Number Signal Name RS-232C Cable Cable and ConnectorUSB Cable Wedge Connector Specification Scanner SideWedge Cable Pin No RS-232CWedge Default with external keyboard Default SettingsRS-232C Default USB-HID DefaultSet Others Code Default Settings 1 Readable CodesWedge Default without external keyboard Symbology Read TransmitSymbology Read Transmit Calculate Set Others Code Default Setting Default Settings 2 Read Options, Trigger, BuzzerSerial Number Packaging SpecificationsIndividual Packaging Specification Collective Packaging SpecificationDrop Test with individual packaging DurabilityElectrical Noise Shock Drop Test without packagingCable Strength Cable Pulling Test Vibration StrengthStatic Electricity Dust and Drip ProofAuto Trigger Option ReliabilityTrigger options Auto Trigger Settings Stand OnlyManually AlwaysEMC Laser SafetyProduct Safety Regulatory ComplianceForeign Materials SafetyTemperature Conditions ShockMechanical drawing Mechanical Drawing