Lathem 7500E manual Setting Bi-Weekly Period in Payroll Mode

Page 19

Setting Bi-Weekly Period in Payroll Mode

Example: Change to Bi-Weekly Period and set the desired starting date of the pay period to October 19.

MODE

FUNCTION CHANGE SET

Bi-Weekly period

MODE

FUNCTION CHANGE SET

Month

MODE

FUNCTION CHANGE SET

Date

MODE

FUNCTION CHANGE SET

1 Push the FUNCTION button for 5 seconds and make sure the " " is positioned under the “MODE” mark.

Set the "Mode".

2 In the case of Bi-Weekly period, push the CHANGE button to set the left-side number at "3" and then push the SET button. At that moment, the flashing of the display will change to the middle number.

Set the "Starting date".

3 You must enter the starting date of the current pay period. For example, if the current date is Wednesday, Oct. 17, and you want the next Bi-Weekly period to start Monday, Oct. 22, enter Monday, Oct. 8 for the starting date.

Now the first day of default pay period is shown. To set pay period, you have to input a starting date. In the example, push the SET button because the month of October is not to be changed. At that moment, the flashing of the display will change from "Month" to "Date".

4 Change "Date" (for example, from 12 to 19). Push the CHANGE button to set "Date" at "19" and then push the SET button, and now the date of 19 has been set.

5 Push the SET button once again.

13

You have completed this setting. Go to the next setting listing in

"Default Settings" on page 7 to continue with the setup.

16

Image 19

Contents Page Time CORP. with all rights reserved Table of Contents Features AccessoriesIntroduction Installing Ribbon Cassette Quick SetupCorrect Wrong Set the Display Hours Setting the Display HoursSetting the Time Zone for Atomic Clock Function Default Settings Advanced Settings Contents Environmental Conditions Mounting Unit on WallLeave about 1/8 gap between wall and screw head Level Line Template for wall mountingSetting the Time Advanced SettingsSetting the Date Payroll Mode Setting the ModeSet the Starting day of the week Setting Weekly Period in Payroll ModeSet the Mode Setting Monthly Period in Payroll ModeSet the Starting date Setting Bi-Weekly Period in Payroll Mode Set the 1st starting date Setting Semi-Monthly Period in Payroll ModeSet the 2nd starting date Set the card Reset Job Cost ModeSet the Date/D.O.W. print format Setting the Print FormatSet the Minute print format for totals only Set the Hour print formatSpecial Note Regarding Punch Rounding Setting the RoundingSet the Rounding unit Set the Types of roundingTotal Setting the Auto Break DeductionSet the Elapsed time Set the Max In Override Setting the MaxSet the Max In Value Optional Setting the Button Function In/OutDisabled RequiredRequired Automatic DST correction Setting the Daylight Savings TimeYear Month Date Mark means Starting date setting Set the ending date Deleting the Daylight Savings Time settings Setting the Print Language Operations & Functions Radio Signal Reception Resetting Settings Resetting Cards In Job Cost Mode Card reassign All cards reset Card reset Print Example Installing Battery Optional Error No. Causes and Actions TroubleshootingQuestions Troubleshooting Questions & AnswersDaily Care Specifications Limited One-Year Warranty Form No. OM75E0909 Q0280-61200