Lathem 7500E manual Job Cost Mode, Set the card Reset

Page 21

Job Cost Mode

This mode is basically the same as Payroll Mode, but has no pay period. After punching 64 times, the end sign appears.

If you want to be able to reset the card manually without removing the cover, you must select "Reset is YES". See page 36 on "Resetting Cards In Job Cost Mode".

Example: Change to Job Cost Mode and Card "Reset" is YES.

MODE

1 Push the FUNCTION button for 5 seconds and make sure the " " is positioned under the "MODE" mark.

FUNCTION CHANGE SET

Job cost

mode

MODE

FUNCTION CHANGE SET

Set the "Mode".

2 Push the CHANGE button to set the left-side number at "5" and then push the SET button. At that moment, the display will change to the right-side number.

Card "Reset"

Set the card "Reset".

Card "Reset"

1 No

MODE

is YES

2

Yes

Default set to 'No'.

FUNCTION CHANGE SET

3 In this case, push the CHANGE button to set at "2" and then push the SET button.

4 Push the SET button once again.

You have completed this setting. Go to the next setting listing in

"Default Settings" on page 5 to continue with the setup.

17

18

Image 21

Contents Page Time CORP. with all rights reserved Table of Contents Features AccessoriesIntroduction Installing Ribbon Cassette Quick SetupCorrect Wrong Set the Display Hours Setting the Display HoursSetting the Time Zone for Atomic Clock Function Default Settings Advanced Settings Contents Environmental Conditions Mounting Unit on WallLeave about 1/8 gap between wall and screw head Level Line Template for wall mountingSetting the Time Advanced SettingsSetting the Date Payroll Mode Setting the ModeSet the Starting day of the week Setting Weekly Period in Payroll ModeSetting Monthly Period in Payroll Mode Set the ModeSet the Starting date Setting Bi-Weekly Period in Payroll Mode Setting Semi-Monthly Period in Payroll Mode Set the 1st starting dateSet the 2nd starting date Set the card Reset Job Cost ModeSet the Date/D.O.W. print format Setting the Print FormatSet the Minute print format for totals only Set the Hour print formatSpecial Note Regarding Punch Rounding Setting the RoundingSet the Rounding unit Set the Types of roundingTotal Setting the Auto Break DeductionSet the Elapsed time Setting the Max Set the Max In OverrideSet the Max In Value Disabled Setting the Button Function In/OutRequired OptionalRequired Automatic DST correction Setting the Daylight Savings TimeYear Month Date Mark means Starting date setting Set the ending date Deleting the Daylight Savings Time settings Setting the Print Language Operations & Functions Radio Signal Reception Resetting Settings Resetting Cards In Job Cost Mode Card reassign All cards reset Card reset Print Example Installing Battery Optional Error No. Causes and Actions TroubleshootingQuestions Troubleshooting Questions & AnswersDaily Care Specifications Limited One-Year Warranty Form No. OM75E0909 Q0280-61200