Lathem 7500E manual Troubleshooting, Error No. Causes and Actions

Page 45

7. TROUBLESHOOTING

Error No. Causes and Actions

No.

Error causes

E-00

CPU error

E-01

The remaining life of lithium battery for

 

memory back-up is short.

 

 

E-03

Card inserted on wrong side.

 

 

E-05

The card is not pulled in properly.

 

 

E-15

Card sensor error

 

 

E-30

The printer motor or the sensor is not normal.

 

 

E-37

The card forwarding motor or the sensor does

 

not operate properly.

 

 

E-38

The print head motor or the sensor for the

 

printer head can not operate properly.

 

 

E-49

Input the wrong settings.

Action

Contact Lathem.

Return clock to Lathem.

The front of the card must be completely filled in before using the back of the card.

Make sure that another time card or another item is not jamming in the time recorder. Try inserting the time card again.

Make sure that another time card is not jamming in the time recorder and the ribbon cassette is correctly inserted in place.

After making sure of the above, close the cover. If the error number continues to be displayed, contact Lathem.

1.Remove and Re-insert the ribbon.

2.Move clock to a dust free location.

3.Send to Lathem or authorized dealer for cleaning and service.

Pay Period settings cannot be changed while cards are stored in memory. An All Cards Reset must be done before making changes to Print Format, Pay Period type, or Pay Period start date.

E-50Can't use the time card.

E-51Calculation Error

E-52Calculation Logic Error

E-59Can't use the time cards because of memory error.

End When the card that you are using becomes full.

1.Make sure cards are form E-7 and made by Lathem Time Corp.

2.Check to make sure the barcode area of the card is not smudged or damaged.

Re-insert card after 1 minute has elapsed. Card cannot be inserted twice in the same minute.

Ensure current date is within pay period dates. May need to 'Reset Settings' if error continues to be displayed.

Use the "Card Reset" function to reset the card. Make sure if you can print by inserting the time card with the same number.

Use the "Card reassign" mode to transfer the card and have a new card take over for the old one.

* If the error number is still displayed after checking above points, contact Lathem Time.

41

42

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Page Time CORP. with all rights reserved Table of Contents Features AccessoriesIntroduction Installing Ribbon Cassette Quick SetupCorrect Wrong Set the Display Hours Setting the Display HoursSetting the Time Zone for Atomic Clock Function Default Settings Advanced Settings Contents Environmental Conditions Mounting Unit on WallLeave about 1/8 gap between wall and screw head Level Line Template for wall mountingSetting the Time Advanced SettingsSetting the Date Payroll Mode Setting the ModeSet the Starting day of the week Setting Weekly Period in Payroll ModeSetting Monthly Period in Payroll Mode Set the ModeSet the Starting date Setting Bi-Weekly Period in Payroll Mode Setting Semi-Monthly Period in Payroll Mode Set the 1st starting dateSet the 2nd starting date Set the card Reset Job Cost ModeSet the Date/D.O.W. print format Setting the Print FormatSet the Minute print format for totals only Set the Hour print formatSpecial Note Regarding Punch Rounding Setting the RoundingSet the Rounding unit Set the Types of roundingTotal Setting the Auto Break DeductionSet the Elapsed time Setting the Max Set the Max In OverrideSet the Max In Value Disabled Setting the Button Function In/OutRequired OptionalRequired Automatic DST correction Setting the Daylight Savings TimeYear Month Date Mark means Starting date setting Set the ending date Deleting the Daylight Savings Time settings Setting the Print Language Operations & Functions Radio Signal Reception Resetting Settings Resetting Cards In Job Cost Mode Card reassign All cards reset Card reset Print Example Installing Battery Optional Error No. Causes and Actions TroubleshootingQuestions Troubleshooting Questions & AnswersDaily Care Specifications Limited One-Year Warranty Form No. OM75E0909 Q0280-61200
Top Page Image Contents