Lathem 7500E manual Setting the Time Zone for Atomic Clock Function

Page 9

Setting the Time Zone for Atomic Clock Function

The Model 7500E can be set to one of the four United States time zones. Additionally, two more options including no reception of WWVB signal are available with this model. By default, the unit is shipped preset to Eastern Time.

	Order Option	Notes

1	Eastern	Default

2	Central

3	Mountain

4	Pacific

5	Other	Adjusts just "minute" and "second" by the WWVB radio signal.
		You must set "date" and "time" to your local time first before
		starting reception of the WWVB signal.

6	No Reception	Disables atomic clock function and does not adjust time by the
		WWVB radio signal.

Important Note: To set the Time Zone for Atomic Clock Function, you must start at Step 1 of "Setting the Display Hours". Continue from Step 3 of "Setting the Display Hours" to Step 4 of "Setting the Time Zone".

Example: Change the time zone to "Central".

CLOCK

OPTION

SELECT

Time

Zone

CHANGE SET

4 In case of the example, push the CHANGE button to set at "2", and then push the SET button to finish the setting. At that moment, the display will change from flashing to steady and the setting is now completed.

5 Push the SET button once again. Then the unit starts reception of the

Reception

Indication

Signal Condition Indication ON Good

FLASHING or OFF Not good enough

WWVB radio signal.

Please see "Radio Signal Reception" on page 34 for more information on the WWVB signal.

5

6

Image 9

Contents Page Time CORP. with all rights reserved Table of Contents Features AccessoriesIntroduction Installing Ribbon Cassette Quick SetupCorrect Wrong Set the Display Hours Setting the Display HoursSetting the Time Zone for Atomic Clock Function Default Settings Advanced Settings Contents Environmental Conditions Mounting Unit on WallLeave about 1/8 gap between wall and screw head Level Line Template for wall mountingSetting the Time Advanced SettingsSetting the Date Payroll Mode Setting the ModeSet the Starting day of the week Setting Weekly Period in Payroll ModeSetting Monthly Period in Payroll Mode Set the ModeSet the Starting date Setting Bi-Weekly Period in Payroll Mode Setting Semi-Monthly Period in Payroll Mode Set the 1st starting dateSet the 2nd starting date Set the card Reset Job Cost ModeSet the Date/D.O.W. print format Setting the Print FormatSet the Minute print format for totals only Set the Hour print formatSpecial Note Regarding Punch Rounding Setting the RoundingSet the Rounding unit Set the Types of roundingTotal Setting the Auto Break DeductionSet the Elapsed time Setting the Max Set the Max In OverrideSet the Max In Value Disabled Setting the Button Function In/OutRequired OptionalRequired Automatic DST correction Setting the Daylight Savings TimeYear Month Date Mark means Starting date setting Set the ending date Deleting the Daylight Savings Time settings Setting the Print Language Operations & Functions Radio Signal Reception Resetting Settings Resetting Cards In Job Cost Mode Card reassign All cards reset Card reset Print Example Installing Battery Optional Error No. Causes and Actions TroubleshootingQuestions Troubleshooting Questions & AnswersDaily Care Specifications Limited One-Year Warranty Form No. OM75E0909 Q0280-61200