Lathem 7500E manual Resetting Cards In Job Cost Mode

Page 39

Resetting Cards In Job Cost Mode

You can reset the card without removing the cover when the time recorder is used under the following condition.

The Job Cost Mode and also the card "Reset" setting is YES.

Refer to "Job Cost Mode" in "Setting the Mode".

In order to reset the card, you must push the right-side button (Reset button) and then insert the card.

After printing "RESET", the card shall be ejected.

Once you push the button, the unit starts beeping. Make sure to insert the card while it beeps.

Reset button

Note: If the last punch was IN, you must insert the card twice.

A fully used card can also be reset by this operation, but without printing the word "RESET".

35

36

Image 39

Contents Page Time CORP. with all rights reserved Table of Contents Features AccessoriesIntroduction Installing Ribbon Cassette Quick SetupCorrect Wrong Set the Display Hours Setting the Display HoursSetting the Time Zone for Atomic Clock Function Default Settings Advanced Settings Contents Environmental Conditions Mounting Unit on WallLeave about 1/8 gap between wall and screw head Level Line Template for wall mountingSetting the Time Advanced SettingsSetting the Date Payroll Mode Setting the ModeSet the Starting day of the week Setting Weekly Period in Payroll ModeSetting Monthly Period in Payroll Mode Set the ModeSet the Starting date Setting Bi-Weekly Period in Payroll Mode Setting Semi-Monthly Period in Payroll Mode Set the 1st starting dateSet the 2nd starting date Set the card Reset Job Cost ModeSet the Date/D.O.W. print format Setting the Print FormatSet the Minute print format for totals only Set the Hour print formatSpecial Note Regarding Punch Rounding Setting the RoundingSet the Rounding unit Set the Types of roundingTotal Setting the Auto Break DeductionSet the Elapsed time Setting the Max Set the Max In OverrideSet the Max In Value Optional Setting the Button Function In/OutDisabled RequiredRequired Automatic DST correction Setting the Daylight Savings TimeYear Month Date Mark means Starting date setting Set the ending date Deleting the Daylight Savings Time settings Setting the Print Language Operations & Functions Radio Signal Reception Resetting Settings Resetting Cards In Job Cost Mode Card reassign All cards reset Card reset Print Example Installing Battery Optional Error No. Causes and Actions TroubleshootingQuestions Troubleshooting Questions & AnswersDaily Care Specifications Limited One-Year Warranty Form No. OM75E0909 Q0280-61200