Lathem 7500E manual Setting the Display Hours, Set the Display Hours

Page 8

Setting the Display Hours

"Display Hours" is the format that the hours appear on the clock face. The default is "AM/PM".

		Type of Hour

	1	AM/PM (12 hour)	For example, PM 2:55

	2	24 hour	For example, 14:55

CLOCK

OPTION

SELECT

Display

Hours

CHANGE SET

Set the "Display Hours".

1 Push the DATE/TIME button for 5 seconds and position the "" under the "CLOCK OPTION" mark.

A flashing number can be changed.

CLOCK

OPTION

SELECT

CHANGE SET

2 Push the CHANGE button to select either "1" for AM/PM or "2" for 24 hour with the left-side number.

3 Push the SET button to confirm the setting. At that moment, the flashing of display will change to the right-side number. The unit is set to "1" for the Eastern Time Zone. If you need to change the time zone for atomic clock function, go to Setting the Time Zone for Atomic Clock Function.

If you don't need to change the time zone setting shown on the display, push the SET button two more times to finish the setting. Then, the unit starts reception of the WWVB radio signal.

5

Image 8

Contents Page Time CORP. with all rights reserved Table of Contents Accessories FeaturesIntroduction Quick Setup Installing Ribbon CassetteCorrect Wrong Setting the Display Hours Set the Display HoursSetting the Time Zone for Atomic Clock Function Default Settings Advanced Settings Contents Mounting Unit on Wall Environmental ConditionsTemplate for wall mounting Leave about 1/8 gap between wall and screw head Level LineAdvanced Settings Setting the TimeSetting the Date Setting the Mode Payroll ModeSetting Weekly Period in Payroll Mode Set the Starting day of the weekSet the Starting date Setting Monthly Period in Payroll ModeSet the Mode Setting Bi-Weekly Period in Payroll Mode Set the 2nd starting date Setting Semi-Monthly Period in Payroll ModeSet the 1st starting date Job Cost Mode Set the card ResetSetting the Print Format Set the Date/D.O.W. print formatSet the Hour print format Set the Minute print format for totals onlySetting the Rounding Special Note Regarding Punch RoundingSet the Types of rounding Set the Rounding unitSetting the Auto Break Deduction TotalSet the Elapsed time Set the Max In Value Setting the MaxSet the Max In Override Setting the Button Function In/Out DisabledRequired OptionalRequired Setting the Daylight Savings Time Automatic DST correctionYear Month Date Mark means Starting date setting Set the ending date Deleting the Daylight Savings Time settings Setting the Print Language Operations & Functions Radio Signal Reception Resetting Settings Resetting Cards In Job Cost Mode Card reassign All cards reset Card reset Print Example Installing Battery Optional Troubleshooting Error No. Causes and ActionsTroubleshooting Questions & Answers QuestionsDaily Care Specifications Limited One-Year Warranty Form No. OM75E0909 Q0280-61200