Lathem 7500E manual Card reassign

Page 40

Card reassign

When the card that you are using becomes full (Max 64 punches), it will show "End" on the display and the buzzer will sound. When the "End" appears, you can use the "Card reassign" mode to transfer the card and have a new card take over from the old one.

In this function, it will be useful:

•when the card has become full before reaching the "Pay Period". [In Payroll Mode]

•when the card that is lost or damaged.

You can transfer the old card to a new one with the same number or the one which is not used in the current pay period. If you are already using all time cards from No. 1 to 100, you can transfer the card only to the new one with the same card number. If you prefer to use another time card with a different number, you must reset the corresponding card first.

Example

Card of No.3

Card of No.17

003

017

transfer

Cover

The number of cards

CHANGE

1

2

Remove the cover.

Push the CHANGE button for 5 seconds.

When you have a card that you are using, the number of cards that you are using will be shown on the display. If there are no cards used at the present state, it will show "n000" and will end the mode.

37

36

Image 40

Contents Page Time CORP. with all rights reserved Table of Contents Accessories FeaturesIntroduction Quick Setup Installing Ribbon CassetteCorrect Wrong Setting the Display Hours Set the Display HoursSetting the Time Zone for Atomic Clock Function Default Settings Advanced Settings Contents Mounting Unit on Wall Environmental ConditionsTemplate for wall mounting Leave about 1/8 gap between wall and screw head Level LineAdvanced Settings Setting the TimeSetting the Date Setting the Mode Payroll ModeSetting Weekly Period in Payroll Mode Set the Starting day of the weekSet the Mode Setting Monthly Period in Payroll ModeSet the Starting date Setting Bi-Weekly Period in Payroll Mode Set the 1st starting date Setting Semi-Monthly Period in Payroll ModeSet the 2nd starting date Job Cost Mode Set the card ResetSetting the Print Format Set the Date/D.O.W. print formatSet the Hour print format Set the Minute print format for totals onlySetting the Rounding Special Note Regarding Punch RoundingSet the Types of rounding Set the Rounding unitSetting the Auto Break Deduction TotalSet the Elapsed time Set the Max In Override Setting the MaxSet the Max In Value Setting the Button Function In/Out DisabledRequired OptionalRequired Setting the Daylight Savings Time Automatic DST correctionYear Month Date Mark means Starting date setting Set the ending date Deleting the Daylight Savings Time settings Setting the Print Language Operations & Functions Radio Signal Reception Resetting Settings Resetting Cards In Job Cost Mode Card reassign All cards reset Card reset Print Example Installing Battery Optional Troubleshooting Error No. Causes and ActionsTroubleshooting Questions & Answers QuestionsDaily Care Specifications Limited One-Year Warranty Form No. OM75E0909 Q0280-61200