The Speaker Company user manual Rear View TDP-225/324 model TDP-225W/324W model

Page 10

2.2.3 Rear View

TDP-225/324 model

TDP-225W/324W model

5

1

2

3

4

1

2

3

6

7

1.Power switch

2.Power jack socket

3.USB interface

4.RS-232C interface (Option for TDP-225W/324W mode)

5.Fan-fold paper entrance chute

6.Ethernet interface (Option for TDP-225/324 model)

7.USB host (Factory option for TDP-225W/324W model)

Note:

The interface picture here is for reference only. Please refer to the product specification for the

interfaces availability.

4

Image 10
Contents USER’S Manual Contents Skip AUTO.BAS Copyright Declaration Product Introduction IntroductionCompliances 급기기 Operations Overview Unpacking and InspectionPrinter Overview Front View TDP-225/324 model TDP-225W/324W modelInterior View TDP-225W 324W model TDP-225/324 Model Rear View TDP-225/324 model TDP-225W/324W model Setting Up the Printer SetupLoading the Media TDP-225/324 model TDP-225W/324W model TDP-225/324 model TDP-225W324W modelTDP-225/324 model TDP-225W/324W model Page Rear external label entrance Page Push the peel-off panel back to the printer Close the top cover gently Press the Feed button to test Cutter paper opening Page Diagnostic Tool Function Description Using USB interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Install MicroSD Memory Card Page Mount the Printer on the Wall Flash Feed labels LED and Button FunctionsLED Color Description Pause the printing jobFunctions 2 Gap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension  Dump mode Printer InitializationParameter Default setting Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor red/amber 5 blinks  solid green Skip AUTO.BAS Troubleshooting LED StatusPrint Problem Problem Possible Cause Recovery ProcedureLCD display Option for TDP-225/324 model Maintenance Printer Part Method IntervalPage Date Content Editor Revise History