The Speaker Company TDP-225 user manual Skip AUTO.BAS

Page 3

4.3.3 Printer Initialization	29
4.3.4 Set Black Mark Sensor as Media Sensor and Calibrate the Black
Mark Sensor	30

4.3.5Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor 30

	4.3.6 Skip AUTO.BAS	31
5. Troubleshooting		32
5.1	LED Status	32
5.2	Print Problem	33
5.3	LCD display (Option for TDP-225/324 model)	34
6. Maintenance		35
Revise History		37

ii

Image 3

Contents USER’S Manual Contents Skip AUTO.BAS Copyright Declaration Introduction Product IntroductionCompliances 급기기 Unpacking and Inspection Operations OverviewFront View TDP-225/324 model TDP-225W/324W model Printer OverviewInterior View TDP-225W 324W model TDP-225/324 Model Rear View TDP-225/324 model TDP-225W/324W model Setup Setting Up the PrinterLoading the Media TDP-225/324 model TDP-225W324W model TDP-225/324 model TDP-225W/324W modelTDP-225/324 model TDP-225W/324W model Page Rear external label entrance Page Push the peel-off panel back to the printer Close the top cover gently Press the Feed button to test Cutter paper opening Page Diagnostic Tool Function Description Using USB interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Install MicroSD Memory Card Page Mount the Printer on the Wall Flash Pause the printing job LED and Button FunctionsLED Color Description Feed labelsFunctions 2 Gap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension Printer Initialization  Dump modeSet Gap Sensor as Media Sensor and Calibrate the Gap Sensor Parameter Default setting red/amber 5 blinks  solid green Skip AUTO.BAS LED Status TroubleshootingProblem Possible Cause Recovery Procedure Print ProblemLCD display Option for TDP-225/324 model Printer Part Method Interval MaintenancePage Revise History Date Content Editor