The Speaker Company TDP-225 user manual Rear external label entrance

3.2.2Loading External Media (For TDP-225/324 model only)

1.Open the printer’s top cover and separate the media holders to fit the media width.

2.Press down the media holder lock switch to fix the media holder.

3.Feeds the media through the rear external label entrance chute. And place the paper, printing side face up, through the media guides, media sensor and place the label leading edge onto the platen roller.

Rear external label entrance

4.Close the top cover gently.

5.Use “Diagnostic Tool” to set the media sensor type and calibrate the selected sensor. (Start the “Diagnostic tool”  Select the “Printer Configuration” tab  Click the “Calibrate

Sensor” button)

Note: Please calibrate the gap/black mark sensor when changing media.

9