The Speaker Company TDP-225 user manual Gap/black mark sensor intension

Page 34

Print speed (inch/sec) Print darkness Label size (inch)

Gap distance (inch)

Gap/black mark sensor intension

Code page

Country code

ZPL setting information

Print darkness

Print speed (inch/sec) Label size

Control prefix Format prefix Delimiter prefix Printer power up motion Printer head close motion

Note:

ZPL is emulating for Zebra® language.

RS232 serial port configuration

Numbers of download files Total & available memory space

Print head check pattern

28

Image 34

Contents USER’S Manual Contents Skip AUTO.BAS Copyright Declaration Product Introduction IntroductionCompliances 급기기 Operations Overview Unpacking and InspectionPrinter Overview Front View TDP-225/324 model TDP-225W/324W modelInterior View TDP-225W 324W model TDP-225/324 Model Rear View TDP-225/324 model TDP-225W/324W model Setting Up the Printer SetupLoading the Media TDP-225/324 model TDP-225W/324W model TDP-225/324 model TDP-225W324W modelTDP-225/324 model TDP-225W/324W model Page Rear external label entrance Page Push the peel-off panel back to the printer Close the top cover gently Press the Feed button to test Cutter paper opening Page Diagnostic Tool Function Description Using USB interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Install MicroSD Memory Card Page Mount the Printer on the Wall Flash Feed labels LED and Button FunctionsLED Color Description Pause the printing jobFunctions 2 Gap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension  Dump mode Printer InitializationParameter Default setting Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor red/amber 5 blinks  solid green Skip AUTO.BAS Troubleshooting LED StatusPrint Problem Problem Possible Cause Recovery ProcedureLCD display Option for TDP-225/324 model Maintenance Printer Part Method IntervalPage Date Content Editor Revise History