The Speaker Company Printer Overview, Front View TDP-225/324 model TDP-225W/324W model

Page 8

2.2 Printer Overview

2.2.1 Front View

TDP-225/324 model

TDP-225W/324W model

 

 

3

3

 

4

4

5

5

 

7

 

 

1

 

1

 

 

 

2

6

2

6

 

1.Top cover open lever

2.MicroSD card socket

3.Media view window

4.LED indicator

5.Feed button

6.Paper exit chute

7.LCD display (Option for TDP-225/324 model)

*Recommended MicroSD card specification.

SD card spec

SD card capacity

Approved SD card manufacturer

 

 

 

V1.0, V1.1

MicroSD 128 MB

Transcend, Panasonic

 

 

 

V1.0, V1.1

MicroSD 256 MB

Transcend, Panasonic

 

 

 

V1.0, V1.1

MicroSD 512 MB

Transcend, Panasonic

 

 

 

V1.0, V1.1

MicroSD 1 GB

Transcend, Panasonic

 

 

 

V2.0 SDHC CLASS 6

MicroSD 4 GB

Transcend

 

 

 

-The DOS FAT file system is supported for the SD card.

-Folders/files stored in the SD card should be in the 8.3 filename format

2

Image 8
Contents USER’S Manual Contents Skip AUTO.BAS Copyright Declaration Compliances IntroductionProduct Introduction 급기기 Operations Overview Unpacking and InspectionPrinter Overview Front View TDP-225/324 model TDP-225W/324W modelInterior View TDP-225W 324W model TDP-225/324 Model Rear View TDP-225/324 model TDP-225W/324W model Loading the Media SetupSetting Up the Printer TDP-225/324 model TDP-225W/324W model TDP-225/324 model TDP-225W324W modelTDP-225/324 model TDP-225W/324W model Page Rear external label entrance Page Push the peel-off panel back to the printer Close the top cover gently Press the Feed button to test Cutter paper opening Page Diagnostic Tool Function Description Using USB interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Install MicroSD Memory Card Page Mount the Printer on the Wall Flash LED and Button Functions LED Color DescriptionFeed labels Pause the printing jobFunctions 2 Gap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension  Dump mode Printer InitializationParameter Default setting Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor red/amber 5 blinks  solid green Skip AUTO.BAS Troubleshooting LED StatusPrint Problem Problem Possible Cause Recovery ProcedureLCD display Option for TDP-225/324 model Maintenance Printer Part Method IntervalPage Date Content Editor Revise History