The Speaker Company TDP-225 user manual Push the peel-off panel back to the printer

Page 17

3.2.3Loading Media in Peel-off Mode (Option)

1.Refer to section 3.2.1 to load the media.

2.Open the top cover and peel-off panel after calibrated the sensor.

Peel-off panel

3. Lead the media through the backing paper opening, beneath the peel-off roller.

Backing paper opening

Peel-off roller

4. Push the peel-off panel back to the printer.

11

Image 17

Contents USER’S Manual Contents Skip AUTO.BAS Copyright Declaration Compliances IntroductionProduct Introduction 급기기 Unpacking and Inspection Operations OverviewFront View TDP-225/324 model TDP-225W/324W model Printer OverviewInterior View TDP-225W 324W model TDP-225/324 Model Rear View TDP-225/324 model TDP-225W/324W model Loading the Media SetupSetting Up the Printer TDP-225/324 model TDP-225W324W model TDP-225/324 model TDP-225W/324W modelTDP-225/324 model TDP-225W/324W model Page Rear external label entrance Page Push the peel-off panel back to the printer Close the top cover gently Press the Feed button to test Cutter paper opening Page Diagnostic Tool Function Description Using USB interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Install MicroSD Memory Card Page Mount the Printer on the Wall Flash LED Color Description LED and Button FunctionsFeed labels Pause the printing jobFunctions 2 Gap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension Printer Initialization  Dump modeSet Gap Sensor as Media Sensor and Calibrate the Gap Sensor Parameter Default setting red/amber 5 blinks  solid green Skip AUTO.BAS LED Status TroubleshootingProblem Possible Cause Recovery Procedure Print ProblemLCD display Option for TDP-225/324 model Printer Part Method Interval MaintenancePage Revise History Date Content Editor