The Speaker Company TDP-225 user manual Start the Diagnostic Tool

Page 21

3.3 Diagnostic Tool

The Diagnostic Utility is enclosed in the CD disk \Utilities directory or can be downloaded from www.tscprinters.com website. The Diagnostic Utility is a toolbox that allows users to explore the printer's settings and status; change printer settings; download graphics, fonts, and firmware; create printer bitmap fonts; and to send additional commands to the printer. Using this convenient tool, you can explore the printer status and settings and troubleshoot the printer.

Note: This utility works with printer firmware V6.00 and later versions.

3.3.1Start the Diagnostic Tool

1.Double click on the Diagnostic tool iconto start the software.

2.There are four features (Printer Configuration, File Manager, Bitmap Font Manager, Command Tool) included in the Diagnostic utility.

Features tab

Interface

Printer functions

Printer setup

Printer Status

15

Image 21

Contents USER’S Manual Contents Skip AUTO.BAS Copyright Declaration Introduction Product IntroductionCompliances 급기기 Unpacking and Inspection Operations OverviewFront View TDP-225/324 model TDP-225W/324W model Printer OverviewInterior View TDP-225W 324W model TDP-225/324 Model Rear View TDP-225/324 model TDP-225W/324W model Setup Setting Up the PrinterLoading the Media TDP-225/324 model TDP-225W324W model TDP-225/324 model TDP-225W/324W modelTDP-225/324 model TDP-225W/324W model Page Rear external label entrance Page Push the peel-off panel back to the printer Close the top cover gently Press the Feed button to test Cutter paper opening Page Diagnostic Tool Function Description Using USB interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Install MicroSD Memory Card Page Mount the Printer on the Wall Flash LED Color Description LED and Button FunctionsFeed labels Pause the printing jobFunctions 2 Gap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension Printer Initialization  Dump modeSet Gap Sensor as Media Sensor and Calibrate the Gap Sensor Parameter Default setting red/amber 5 blinks  solid green Skip AUTO.BAS LED Status TroubleshootingProblem Possible Cause Recovery Procedure Print ProblemLCD display Option for TDP-225/324 model Printer Part Method Interval MaintenancePage Revise History Date Content Editor