The Speaker Company user manual TDP-225/324 model TDP-225W/324W model

Page 12

3. Separate the media holders to the label roll width.

TDP-225/324 model

TDP-225W/324W model

4. Place the roll between the holders and close them onto the core.

TDP-225/324 model

TDP-225W/324W model

Sensor

Platen roller

5.Place the paper, printing side face up, through the media guides, media sensor and place the label leading edge onto the platen roller.

TDP-225/324 model

TDP-225W324W model

Media guides

6

Image 12

Contents USER’S Manual Contents Skip AUTO.BAS Copyright Declaration Introduction Product IntroductionCompliances 급기기 Operations Overview Unpacking and InspectionPrinter Overview Front View TDP-225/324 model TDP-225W/324W modelInterior View TDP-225W 324W model TDP-225/324 Model Rear View TDP-225/324 model TDP-225W/324W model Setup Setting Up the PrinterLoading the Media TDP-225/324 model TDP-225W/324W model TDP-225/324 model TDP-225W324W modelTDP-225/324 model TDP-225W/324W model Page Rear external label entrance Page Push the peel-off panel back to the printer Close the top cover gently Press the Feed button to test Cutter paper opening Page Diagnostic Tool Function Description Using USB interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Install MicroSD Memory Card Page Mount the Printer on the Wall Flash LED and Button Functions LED Color DescriptionFeed labels Pause the printing jobFunctions 2 Gap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension  Dump mode Printer InitializationParameter Default setting Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor red/amber 5 blinks  solid green Skip AUTO.BAS Troubleshooting LED StatusPrint Problem Problem Possible Cause Recovery ProcedureLCD display Option for TDP-225/324 model Maintenance Printer Part Method IntervalPage Date Content Editor Revise History