The Speaker Company TDP-225 user manual

Page 14

Note:

*Please calibrate the gap/black mark sensor when changing media.

*Please refer to videos on TSC YouTube or driver CD.

Loading path for roll labels

TDP-225/324 model

TDP-225W/324W model

8

Image 14

Contents USER’S Manual Contents Skip AUTO.BAS Copyright Declaration Compliances IntroductionProduct Introduction 급기기 Operations Overview Unpacking and InspectionPrinter Overview Front View TDP-225/324 model TDP-225W/324W modelInterior View TDP-225W 324W model TDP-225/324 Model Rear View TDP-225/324 model TDP-225W/324W model Loading the Media SetupSetting Up the Printer TDP-225/324 model TDP-225W/324W model TDP-225/324 model TDP-225W324W modelTDP-225/324 model TDP-225W/324W model Page Rear external label entrance Page Push the peel-off panel back to the printer Close the top cover gently Press the Feed button to test Cutter paper opening Page Diagnostic Tool Function Description Using USB interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Install MicroSD Memory Card Page Mount the Printer on the Wall Flash Feed labels LED and Button FunctionsLED Color Description Pause the printing jobFunctions 2 Gap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension  Dump mode Printer InitializationParameter Default setting Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor red/amber 5 blinks  solid green Skip AUTO.BAS Troubleshooting LED StatusPrint Problem Problem Possible Cause Recovery ProcedureLCD display Option for TDP-225/324 model Maintenance Printer Part Method IntervalPage Date Content Editor Revise History