The Speaker Company TDP-225 user manual Maintenance, Printer Part Method Interval

6. Maintenance

This session presents the clean tools and methods to maintain your printer.

1.Please use one of following material to clean the printer.  Cotton swab (Head cleaner pen)

 Lint-free cloth

 Vacuum / Blower brush  100% ethanol

2.The cleaning process is described as following:

Printer Part	Method	Interval
	1. Always turn off the printer before cleaning	Clean the print head when changing a
	the print head.	new label roll
	2. Allow the print head to cool for a minimum
	of one minute.
	3. Use a cotton swab and 100% ethanol to
	clean the print head surface.
Print Head
	1. Turn the power off.	Clean the platen roller when changing
Platen Roller	2. Rotate the platen roller and wipe it	a new label roll
	thoroughly with 100% ethanol and a
	cotton swab, or lint-free cloth.
Tear Bar/Peel Bar	Use the lint-free cloth with 100% ethanol to	As needed
	wipe it.
Sensor	Compressed air or vacuum	Monthly
Exterior	Wipe it with water-dampened cloth	As needed
Interior	Brush or vacuum	As needed

Note:

Do not touch printer head by hand. If you touch it careless, please use ethanol to clean it.

35