The Speaker Company TDP-225 user manual

Page 42

Please use 100% Ethenol. DO NOT use medical alcohol, which may damage the printer head.

Regularly clean the print head and supply sensors once change a new media to keep printer performance and extend printer life.

The maximum printing ratio per dot line is 15% for this printer. To print the full web black line, the maximum black line height is limited to 40 dots, which is 5mm for 203 DPI resolution printer and 3.3mm for 300 DPI resolution printers..

36

Image 42

Contents USER’S Manual Contents Skip AUTO.BAS Copyright Declaration Introduction Product IntroductionCompliances 급기기 Operations Overview Unpacking and InspectionPrinter Overview Front View TDP-225/324 model TDP-225W/324W modelInterior View TDP-225W 324W model TDP-225/324 Model Rear View TDP-225/324 model TDP-225W/324W model Setup Setting Up the PrinterLoading the Media TDP-225/324 model TDP-225W/324W model TDP-225/324 model TDP-225W324W modelTDP-225/324 model TDP-225W/324W model Page Rear external label entrance Page Push the peel-off panel back to the printer Close the top cover gently Press the Feed button to test Cutter paper opening Page Diagnostic Tool Function Description Using USB interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page Install MicroSD Memory Card Page Mount the Printer on the Wall Flash Feed labels LED and Button FunctionsLED Color Description Pause the printing jobFunctions 2 Gap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension  Dump mode Printer InitializationParameter Default setting Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor red/amber 5 blinks  solid green Skip AUTO.BAS Troubleshooting LED StatusPrint Problem Problem Possible Cause Recovery ProcedureLCD display Option for TDP-225/324 model Maintenance Printer Part Method IntervalPage Date Content Editor Revise History