Socket Mobile GFK0121E manual Contents

		Contents
Chapter 1	Introduction	. . 1-1
	Hand-held Monitor Description	. . 1-2
	HHM Compatibility	. . 1-4
	HHM Specifications	. . 1-5
	Ordering Information	. . 1-5
Chapter 2	Hardware Setup	. . 2-1
	Power for the Hand-held Monitor	. . 2-1
	Changing the PROM	. . 2-4
	Permanent Installation	. . 2-6
	Installing a Separate Hand-held Monitor Connector	. . 2-9
Chapter 3	GettingStarted	. . 3-1
Chapter 4	Device Configuration: Overview	. . 4-1
Chapter 5	Monitoring the Bus and its Devices	. . 5-1

	Monitor Block Display for Discrete I/O and Input Blocks	5-4
	Monitor Block Display for Discrete Relay Output Blocks	5-5
	Monitor Block Display for Analog Blocks	5-5
	Monitor Block Display for RTD or Thermocouple Blocks	5-5
	Monitor Block Display for a High-speed Counter Block	5-6
	Monitor Block Display for a PowerTRAC Block	5-7
	Monitor/Control Reference Display for a Discrete, Relay, or High-speed Counter
	Block	5-9
	Monitor/Control Reference Display for an Analog, RTD, or Thermocouple Block
	5-10
	Monitor/Control Reference Displays for a PowerTRAC Block	5-11
Chapter 6	Reading CPU Memory	6-1
Chapter 7	Error Messages	7-1

GFK-0121E Table of Contents i