Socket Mobile GFK0121E manual HHM Specifications, Optional Accessories

Page 10

1

HHM Specifications

Operatingtemperature

Storagetemperature

Humidity

Weight: withoutcase withcase

Size (HxWxD): withoutcase withcase

Required AC power (for battery charger)

Fully chargedoperation

Displaycharacters

Keyboard

Features

Displaylanguage

Drop Test

DataRates

0±60 C(32±140 F)

±40 to +70 C(±40 to 158 F)

5-95%(non-condensing)

1.3lbs (0.6 Kg)

1.8lbs (0.8 Kg)

8.00º xº 3.75 xº 1.25 (cmx) 10.85º x 4.30º x 2.25º 115/230VAC 15%, 47-63 Hz

(16-hourchargingperiodforIC660BPM500B.

8-hour charging period for IC660BPM500A, now discontinued.)

6 hours

4 lines each of 16 LCD (0.2º - 5 mm high)

20 sealed keys with tactile feedback

PerformsGeniusI/Oblockconfiguration,monitors I/O data on Genius bus, displays diagnostic in- formation.

English,German, French, or Italian

Survives drop from 4 feet (1.2 meters) to concrete floor landing on any surface or corner without af- fecting its operation.

153.6Kbaud standard, 153.5 Kbaud extended,76.8 Kbaud,38.4Kbaud

Ordering Information

Description

Hand-Held Monitor (includes all items listed below)

Cable from HHM to I/O Block

Battery Pack

Battery Charger

Catalog Number

IC660HHM501

IC660HHC005

IC660BPM500

IC660BCM501

Optional Accessories

External HHM Connector: A panel-mountable or DIN rail-mountable HHM connector (catalog number 44A736310-001-R001) is available. It can be used to provide a permanent HHM connection point on a Genius bus. See chapter 2 for a description.

230VAC Power Adapter: An optional 230VAC Power Adapter (IC660MCA512) can be used to connect the Hand-held Monitor Charger to variety of 230 VAC power outlets by means of a standard computer cable (not supplied). See chapter 2 for a description.

Extra HHM Keys: For applications requiring extra keys for the Hand-held Monitor, a group of five sets can be ordered separately. The catalog number is IC660MKS511.

GFK-0121E

Chapter 1 Introduction

1-5

Image 10

Contents GE Fanuc Automation GFL±002 Content of this Manual Related PublicationsPreface Contents Chapter Introduction Hand-held Monitor Description HHM KeypadAccessories KeyswitchHHM Display HHM Compatibility HHM Specifications Optional AccessoriesCharging the Battery Pack for AC Operation Selecting 120 VAC or 230 VACUsing the 230VAC Power Adapter InstructionsCharging the Battery Pack Battery OperationLow Battery Power Replacing the Battery PackChanging the Prom Conductive mat Permanent Installation Configuring a Permanently-installed HHMHHM Installation Instructions CutoutInstalling the D-Shell HHM Connector SERInstalling a Separate Hand-held Monitor Connector Mounting the HHM ConnectorMaking the Bus Connections Chapter Getting Started Setting the HHM Baud Rate Powerup Error MessagesDisplaying the Home Menu Main HHM ScreensConfiguring the Hand-held Monitor Changing the HHM Device NumberSelecting the Host CPU Changing the HHM Display LanguageEnabling/Disabling Automatic Shutoff Enabling/Disabling the Ability to Clear Faults Enabling/Disabling the Ability to Force I/O CircuitsTesting the Keypad Testing Operation of the Hand-held MonitorTesting the Internal Electronics Testing the Display ScreenChapter Device Configuration Overview Online Configuration Online or Offline ConfigurationStarting Configuration Offline ConfigurationDisplaying the Configuration Menus Completing the Program Block ID Screens To Set the I/O Map for a Remote I/O ScannerConfiguration Notes Configuring the Remote DropConfiguring Block Features ConfiguringGenius BlocksCopying a Configuration Configuration InstructionsChange the Bus Address Configure Additional FeaturesSelect a PLC Reference Address Disable the I/O Scan Configuring Individual Field Control ModulesConfigure Data Addresses and Lengths Add Modules and Assign References Configuring Module FeaturesAssign I/O References for the Module Chapter Monitoring the Bus and its Devices Displaying Information About Bus Devices Selecting Another DeviceSwitching a Dual Bus Monitoring the Bus StatusMaking the Block Active Monitoring a Genius BlockMonitor Block Display for Discrete I/O and Input Blocks Block ReferencesMonitor Block Display for Discrete Relay OutputBlocks Monitor Block Display for Analog BlocksPreset Outputs Monitor Block Display for a High-speed Counter BlockMonitor Block Display for a PowerTRACBlock Calculated DataBasic Monitor/Control Display Format Clearing Circuit Faults DiagnosticsForcing an Input or Output Forcing an Analog, RTD, or Thermocouple Value PowerTRAC Data Sequence Monitor/Control Reference Displays for a PowerTRAC BlockSelecting a Memory Type or Address PowerTRAC Extra Calculated Data Lpio Screens PowerTRAC Status Inputs ScreensPowerTRAC Calculated Data Screens PowerTRAC Control Outputs ScreensMonitoring/Controlling Remote Drop Data Displaying Other CircuitsClearing Faults Displaying and Clearing Remote Drop FaultsForcing a Circuit Displaying Another Reference Changing the Display ModeMonitoring/Controlling Field Control Data Returning to the Previous MenuDisplaying Field Control Faults Clearing Field Control FaultsPulse Test Error Messages Pulse Testing Outputs on Discrete Genius BlocksClearing Pulse Test Faults Executing a Pulse TestChapter Reading CPU Memory General InstructionsSeries 90 PLC Enter or Change the PLC Type Series Six PLCEnter or Change the Memory Location Series Five PLC DataChanging the Data Format Changing the Selected AddressChapter Error Messages Powerup Error MessagesOperating Error Messages Configuration Error MessagesIndex Index-2 Index-3 Index-4