Uniden 416 System Programming, Assigning C.O. Lines, What is the Central Office C.O.?, Mode N

Page 11

SYSTEM PROGRAMMING

To set the features withS, put the mode switch in the set-up mode at the right. After setting all the features, put the mode switch on the N : Business-Hour Mode or O/H : Off-Hour Mode.

Assigning C.O. Lines

By assigning C.O. Lines you can maximise the usage of the UPBX416.

There are several options depending on how many incoming lines you have and how you want to use the system.

1.What is the Central Office (C.O.)?

All phone calls are routed through the telephone company’s central office. Technically speaking, central office is the switching equipment that provides the local-exchange telephone service for a given geographical area. Central office line is the telephone line that is connected to the telephone company’s central office.

2.C.O. Lines C.O.1~C.O.4 are the incoming telephone lines that are connected to Line 1~Line 4 on the back of the unit for the telephone call.

4 C.O. Lines used for telephone calls. (default setting)

All C.O. Lines are initially assigned for telephone calls.

Operation: S 1 0 0 N

1.Set the MODE Switch on the right side of the unit to Set-Up ModeS

2.Lift the handset connected to Ext. 200 - the dial tone is heard in the receiver.

3.Press 1 0 0 you will hear a long dial tone.

4.Replace the handset.

5.Set the MODE Switch on the right side of the unit to Business-Hour

Mode N

6

Image 11

Contents USER’S Page Contents Versatile Exchanger Settings Uniden UPBX416 Communication Centre Important Safety Instructions PrecautionsUniden’s UPBX416 is ideal for small or home office use FeaturesIntroduction Included in your UPBX416 Package USER’SLines for no telephone call? InstallationSteps for Setting Up Connecting Power Connecting Telephone LinesConnecting Telephone Lines to Extensions System Programming What is the Central Office C.O.?O. Lines used for telephone calls. default setting Mode NWhen disabled To Check Time and Week System OGMs OGM 3 When there is No AnswerOGM 7 When Connecting to the Operator Recording System OGMs Auto AttendantTo select OGM number Recording System OGMs Out Going MessagesOperation S PressOperation S 6 0 0 Setting Number of RingsPress 6 0 to enter the feature Checking System OGMs Out Going MessagesRecording Station OGM Password RegistrationManaging OWN Voice Mail BOX Music-On-HoldManaging ICMs from a Local Telephone PressChecking Station OGM Press Telephone No. and # Managing ICMs From a Remote Telephone Remote ControlOperation Press 2 to play ICMCall NotificationCall Paging When Leaving Your DeskReceiving messages No. # Method 1 Obtaining an idle line for your outgoing call Basic Telephony OperationsIntercom Call Outside CallOperation Flash Call Pick-UpLeaving a message after a call pick-up Leaving a message by extensionOperation 6 Conference Call / 3-Way CallingExtension / C.O. Line Callback Caller will be placed on MOH Last Number RedialCall Hold Call ScreenCall Forwarding Outside Call ForwardingCall Forwarding to Extension Number To be calledPage System Memory Dial Input/Out Memory DialExtension Memory Dial Input/Out To Dial OUT OGM 6 in the Off-Hour Setting the Off-Hour modeMethod 1 by Mode Switch Method 2 by using telephoneTo SET S 6 7 # Setting the Business-Hour mode Default settingUrgent Call Operation To SETOperation S 6 3 # N Auto-Attendant ModeAttendant Mode Press 6 3 to enter the Attendant modeAssigning Attendant Telephone Sub-Attendant ModeMulti-Attendant Mode Press to remove Replace the handset Class Of Service COS Code RestrictionOperation To Enter COS code To remove Station Class Of Service COS Code RestrictionPress # to set Replace the handset To Free station max. digit restriction Station Maximum Digit RestrictionPress 0