Uniden 416 manual Basic Telephony Operations, Intercom Call, Outside Call, Call Transfer

Page 22

When a busy extension becomes available, the system is able to notify your extension. (See page 19 ‘Extension/C.O. Line Callback’)

When a busy C.O. Line becomes available, the system is able to notify your extension. (See page ‘Extension/C.O. Line Callback’)

If you are not using all 4 C.O. Lines, make sure you have disabled unused C.O. Lines.

MOH - Music on Hold

17

BASIC TELEPHONY OPERATIONS

Intercom Call

Intercom calls at the extension can be made by simply dialling the extension number. Operation:

1.Lift the handset - the dial tone is heard in the receiver.

2.Press ( 2 0 0 2 1 5 ( (200~215 means to choose one extension from 200 to 215) you wish to call.

3.Replace the handset to end the call.

Outside Call

There are two methods for placing an outside call.

Method 1: Obtaining an idle line for your outgoing call

Operation: 0 Telephone No.

1.Lift the handset - the dial tone is heard in the receiver.

2.Press 0 to obtain a free line for an out-going call.

3.Press the telephone number you wish to call.

Method 2: Making a Direct LINE Selection

Operation: 8

( 1 4

(

Telephone No.

1.Lift the handset - the dial tone is heard in the receiver.

2.Press 8 - dial tone stops.

3.	Press (	1		4	( to choose line 1 - 4 (C.O.1 - C.O.4) for an out-going
	call.
4.	Press the telephone number you wish to call.

Call Transfer

You can transfer an outside call or an intercom call to a third party.

Operation: Flash	) 2 0 0		2 1 5 )or 0

1.Press a flash after receiving or placing a call.

-The dial tone is heard in the receiver.

-The other party is placed on MOH.

2.Press the number of the third station.

3.If the third party responds, the call is transferred.

4.Replace the handset.

-The held line is released from MOH and connected to the third party extension.

-If you replace the handset before the third extension answers, the call

on hold is transferred to the station.

Image 22

Contents USER’S Page Contents Versatile Exchanger Settings Uniden UPBX416 Communication Centre Precautions Important Safety InstructionsIntroduction FeaturesUniden’s UPBX416 is ideal for small or home office use USER’S Included in your UPBX416 PackageSteps for Setting Up InstallationLines for no telephone call? Connecting Telephone Lines to Extensions Connecting Telephone LinesConnecting Power Mode N What is the Central Office C.O.?O. Lines used for telephone calls. default setting System ProgrammingWhen disabled To Check Time and Week Recording System OGMs Auto Attendant OGM 3 When there is No AnswerOGM 7 When Connecting to the Operator System OGMsPress Recording System OGMs Out Going MessagesOperation S To select OGM numberChecking System OGMs Out Going Messages Setting Number of RingsPress 6 0 to enter the feature Operation S 6 0 0Music-On-Hold Password RegistrationManaging OWN Voice Mail BOX Recording Station OGMChecking Station OGM PressManaging ICMs from a Local Telephone Press 2 to play ICM Managing ICMs From a Remote Telephone Remote ControlOperation Press Telephone No. and #Receiving messages When Leaving Your DeskCall NotificationCall Paging No. # Outside Call Basic Telephony OperationsIntercom Call Method 1 Obtaining an idle line for your outgoing callLeaving a message by extension Call Pick-UpLeaving a message after a call pick-up Operation FlashExtension / C.O. Line Callback Conference Call / 3-Way CallingOperation 6 Call Screen Last Number RedialCall Hold Caller will be placed on MOHTo be called Call ForwardingCall Forwarding to Extension Number Call Forwarding OutsidePage Extension Memory Dial Input/Out Memory DialSystem Memory Dial Input/Out To Dial OUT Method 2 by using telephone Setting the Off-Hour modeMethod 1 by Mode Switch OGM 6 in the Off-HourOperation To SET Setting the Business-Hour mode Default settingUrgent Call To SET S 6 7 #Press 6 3 to enter the Attendant mode Auto-Attendant ModeAttendant Mode Operation S 6 3 # NMulti-Attendant Mode Sub-Attendant ModeAssigning Attendant Telephone Operation To Enter COS code Class Of Service COS Code RestrictionPress to remove Replace the handset Press # to set Replace the handset Station Class Of Service COS Code RestrictionTo remove Press 0 Station Maximum Digit RestrictionTo Free station max. digit restriction