Uniden 416 manual Setting the Business-Hour mode Default setting, Urgent Call, Operation To SET

Page 31

In the Business Hour Mode the Call Forwarding Outside feature will transfer the call directly to wherever you are.

Setting the Business-Hour mode (Default setting)

The recorded message greets callers during business hours and guides them through the system menu. The caller may choose to be routed to any of the 16 available local extensions, or remote extensions. Callers are prompted to make their choices using a touch tone phone. OGM1 is played in this mode.

Operation:

To SET:

Set the MODE Switch (right side of the unit) to Business-Hour Mode N

Urgent Call

This is only for urgent calls and the call forward can be done from a virtual extension 216. You need to set this feature at extension 200.

Operation:

To REGISTER:

S

6 7

Telephone No.

#

OH

1.Set the MODE Switch on the right side of the unit to Set-Up ModeS

2.Lift the handset - the dial tone is heard in the receiver.

3.Press 6 7 to enable this feature.

4.Press telephone number to be called (If you want to leave the extension number, press for PAUSE plus the extension number, after entering the telephone number.)

5.Press # to exit this feature.

6.Replace the handset

7.Set the MODE Switch on the right side of the unit to Off-Hour Mode OH

To SET: S 6 7 #

1.Set the MODE Switch on the right side of the unit to Set-Up ModeS

2.Lift the handset - the dial tone is heard in the receiver.

3.Press 6 7 to enable this feature.

4.Press # to exit this feature.

5.Replace the handset

To CANCEL: S 6 7

1.Set the MODE Switch on the right side of the unit to Set-Up Mode S

2.Lift the handset - the dial tone is heard in the receiver.

3.Press 6 7 - to enable this feature.

4.Press - to exit this feature.

5.Replace the handset

6.Set the MODE Switch on the right side of the unit to Off-Hour Mode OH

26

Image 31
Contents USER’S Page Contents Versatile Exchanger Settings Uniden UPBX416 Communication Centre Important Safety Instructions PrecautionsIntroduction FeaturesUniden’s UPBX416 is ideal for small or home office use Included in your UPBX416 Package USER’SSteps for Setting Up InstallationLines for no telephone call? Connecting Telephone Lines to Extensions Connecting Telephone LinesConnecting Power System Programming What is the Central Office C.O.?O. Lines used for telephone calls. default setting Mode NWhen disabled To Check Time and Week System OGMs OGM 3 When there is No AnswerOGM 7 When Connecting to the Operator Recording System OGMs Auto AttendantTo select OGM number Recording System OGMs Out Going MessagesOperation S PressOperation S 6 0 0 Setting Number of RingsPress 6 0 to enter the feature Checking System OGMs Out Going MessagesRecording Station OGM Password RegistrationManaging OWN Voice Mail BOX Music-On-HoldChecking Station OGM PressManaging ICMs from a Local Telephone Press Telephone No. and # Managing ICMs From a Remote Telephone Remote ControlOperation Press 2 to play ICMReceiving messages When Leaving Your DeskCall NotificationCall Paging No. # Method 1 Obtaining an idle line for your outgoing call Basic Telephony OperationsIntercom Call Outside CallOperation Flash Call Pick-UpLeaving a message after a call pick-up Leaving a message by extensionExtension / C.O. Line Callback Conference Call / 3-Way CallingOperation 6 Caller will be placed on MOH Last Number RedialCall Hold Call ScreenCall Forwarding Outside Call ForwardingCall Forwarding to Extension Number To be calledPage Extension Memory Dial Input/Out Memory DialSystem Memory Dial Input/Out To Dial OUT OGM 6 in the Off-Hour Setting the Off-Hour modeMethod 1 by Mode Switch Method 2 by using telephoneTo SET S 6 7 # Setting the Business-Hour mode Default settingUrgent Call Operation To SETOperation S 6 3 # N Auto-Attendant ModeAttendant Mode Press 6 3 to enter the Attendant modeMulti-Attendant Mode Sub-Attendant ModeAssigning Attendant Telephone Operation To Enter COS code Class Of Service COS Code RestrictionPress to remove Replace the handset Press # to set Replace the handset Station Class Of Service COS Code RestrictionTo remove Press 0 Station Maximum Digit RestrictionTo Free station max. digit restriction