Uniden 416 Call Pick-Up, Leaving a message after a call pick-up, Leaving a message by extension

Page 23

1.When the station OGM has not recorded, the following message will be played ; “ I am not able to take your call right now. Please record your message after the beep and hang up or press the # key.

2.The # key is the key located below the ‘9’ key .

Call Pick-Up

This feature allows the user to answer an incoming or intercom call at any extension. This feature is available at DTMF(Tone) extension.

Operation: #

1.Lift the handset. - the dial tone is heard in the receiver.

2.Press # - the call is automatically transferred to the extension picking up the call.

Leaving a message after a call pick-up

After someone picks up the telephone, the call can be connected to your mailbox directly so the caller can leave a message.

			)				)
	Operation : Flash	7 7		2 0 0 2 1 5

Recording

1.The person who answers the phone makes a ‘flash” once after receiving an outside call.

2.Press 7 7 - to transfer the call to a extension’s mailbox.

		)				)
	3. Press extension number ;		2 0 0 2 1 5

4.The call is connected to the extension’s mailbox.

5.The caller can leave a message after listening to the extension’s OGM.

Leaving a message by extension

This feature is to leave messages by extension.

Operation: 7 7	) 2 0 0		2 1 5 )

1.Lift the handset – the dial tone is heard in the receiver.

2.Press 7 7

3. Press the extension number	) 2 0 0		2 1 5 ) connected to the

station’s mailbox.

4.The caller can leave a message after listening to the station’s OGM.

5.Replace the handset.

18

Image 23

Contents USER’S Page Contents Versatile Exchanger Settings Uniden UPBX416 Communication Centre Important Safety Instructions PrecautionsUniden’s UPBX416 is ideal for small or home office use FeaturesIntroduction Included in your UPBX416 Package USER’SLines for no telephone call? InstallationSteps for Setting Up Connecting Power Connecting Telephone LinesConnecting Telephone Lines to Extensions System Programming What is the Central Office C.O.?O. Lines used for telephone calls. default setting Mode NWhen disabled To Check Time and Week System OGMs OGM 3 When there is No AnswerOGM 7 When Connecting to the Operator Recording System OGMs Auto AttendantTo select OGM number Recording System OGMs Out Going MessagesOperation S PressOperation S 6 0 0 Setting Number of RingsPress 6 0 to enter the feature Checking System OGMs Out Going MessagesRecording Station OGM Password RegistrationManaging OWN Voice Mail BOX Music-On-HoldManaging ICMs from a Local Telephone PressChecking Station OGM Press Telephone No. and # Managing ICMs From a Remote Telephone Remote ControlOperation Press 2 to play ICMCall NotificationCall Paging When Leaving Your DeskReceiving messages No. # Method 1 Obtaining an idle line for your outgoing call Basic Telephony OperationsIntercom Call Outside CallOperation Flash Call Pick-UpLeaving a message after a call pick-up Leaving a message by extensionOperation 6 Conference Call / 3-Way CallingExtension / C.O. Line Callback Caller will be placed on MOH Last Number RedialCall Hold Call ScreenCall Forwarding Outside Call ForwardingCall Forwarding to Extension Number To be calledPage System Memory Dial Input/Out Memory DialExtension Memory Dial Input/Out To Dial OUT OGM 6 in the Off-Hour Setting the Off-Hour modeMethod 1 by Mode Switch Method 2 by using telephoneTo SET S 6 7 # Setting the Business-Hour mode Default settingUrgent Call Operation To SETOperation S 6 3 # N Auto-Attendant ModeAttendant Mode Press 6 3 to enter the Attendant modeAssigning Attendant Telephone Sub-Attendant ModeMulti-Attendant Mode Press to remove Replace the handset Class Of Service COS Code RestrictionOperation To Enter COS code To remove Station Class Of Service COS Code RestrictionPress # to set Replace the handset To Free station max. digit restriction Station Maximum Digit RestrictionPress 0