Uniden 416 manual Call Forwarding to Extension Number, To be called, Call Forwarding Outside

Page 26

21

CALL FORWARDING

Call Forwarding to Extension Number

When you step out of the office, you can forward an incoming call to a designated extension number.

Operation:

To SET: 6 2

) 2 0 0

 

2 1 5 )

 

1.Lift the handset - the dial tone is heard in the receiver.

2.Press 6 2 to get into this feature.

3.

Press extension number ) 2 0 0

 

2 1 5 )to enter a station number

 

 

to be called.

4.

Replace the handset.

To CANCEL: 6 2 1. Lift the handset.

2. Press 6 2 to get into this feature.

3. Press to exit this feature.

4. Replace the handset.

Call Forwarding Outside

You can automatically forward incoming calls to an outside telephone number from each station (e.g.: your cellular phone or an office phone you are visiting). Calls using this feature can only last for a maximum of 3 minutes. At the end of 3 minutes you will hear a voice prompt; “Please press the pound key to extend your call”

If you wish to extend the call for more than 3 minutes, press the # key after the voice announcement.

To use this feature you need to subscribe to a 3 way calling service from your local telephone company (New Zealand only).

Operation:

To REGISTER: 6 6 Telephone No. #

1.Lift the handset - the dial tone is heard in the receiver.

2.Press 6 6 - to get into this feature.

3.Press telephone number - to enter a telephone number to be called. (If

you want to leave the extension number, press and extension number after entering the telephone number.)

4.Press # to exit this feature.

5.Replace the handset

To SET: 6 6 #

1.Lift the handset - the dial tone is heard in the receiver.

2.Press 6 6 - to get into the feature.

3.Press # - to exit this feature.

Image 26
Contents USER’S Page Contents Versatile Exchanger Settings Uniden UPBX416 Communication Centre Precautions Important Safety InstructionsUniden’s UPBX416 is ideal for small or home office use FeaturesIntroduction USER’S Included in your UPBX416 PackageLines for no telephone call? InstallationSteps for Setting Up Connecting Power Connecting Telephone LinesConnecting Telephone Lines to Extensions Mode N What is the Central Office C.O.?O. Lines used for telephone calls. default setting System ProgrammingWhen disabled To Check Time and Week Recording System OGMs Auto Attendant OGM 3 When there is No AnswerOGM 7 When Connecting to the Operator System OGMsPress Recording System OGMs Out Going MessagesOperation S To select OGM numberChecking System OGMs Out Going Messages Setting Number of RingsPress 6 0 to enter the feature Operation S 6 0 0Music-On-Hold Password RegistrationManaging OWN Voice Mail BOX Recording Station OGMManaging ICMs from a Local Telephone PressChecking Station OGM Press 2 to play ICM Managing ICMs From a Remote Telephone Remote ControlOperation Press Telephone No. and #Call NotificationCall Paging When Leaving Your DeskReceiving messages No. # Outside Call Basic Telephony OperationsIntercom Call Method 1 Obtaining an idle line for your outgoing callLeaving a message by extension Call Pick-UpLeaving a message after a call pick-up Operation FlashOperation 6 Conference Call / 3-Way CallingExtension / C.O. Line Callback Call Screen Last Number RedialCall Hold Caller will be placed on MOHTo be called Call ForwardingCall Forwarding to Extension Number Call Forwarding OutsidePage System Memory Dial Input/Out Memory DialExtension Memory Dial Input/Out To Dial OUT Method 2 by using telephone Setting the Off-Hour modeMethod 1 by Mode Switch OGM 6 in the Off-HourOperation To SET Setting the Business-Hour mode Default settingUrgent Call To SET S 6 7 #Press 6 3 to enter the Attendant mode Auto-Attendant ModeAttendant Mode Operation S 6 3 # NAssigning Attendant Telephone Sub-Attendant ModeMulti-Attendant Mode Press to remove Replace the handset Class Of Service COS Code RestrictionOperation To Enter COS code To remove Station Class Of Service COS Code RestrictionPress # to set Replace the handset To Free station max. digit restriction Station Maximum Digit RestrictionPress 0